WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Clean the applicable component interfaces and the adjacent area with R a MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS R (Material No. 11-026).
 1EFF : ALL 1 23-61-42Page 419 1 1 Feb 01/01 1 1 1CES 1

 (2)
 Make sure that the parts retained from the removed component are clean and in the correct condition.

 (3)
 Do an inspection of the component interface and/or the adjacent area.

 (4)
 Apply a layer of SEALANTS (Material No. 09-002) to the interface of the applicable static discharger retainer.

 Subtask 23-61-42-420-057
 F. Preparation for Installation of the Static Discharger Retainers Zone 534
 (634) (Wing-Tip Fence)
 (Ref. Fig. 405/TASK 23-61-42-991-006)

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Clean the applicable component interfaces and the adjacent area with R a MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS R (Material No. 11-026).
 (2)
 Make sure that the parts retained from the removed component are clean and in the correct condition.

 (3)
 Do an inspection of the component interface and/or the adjacent area.

 (4)
 Apply a layer of SEALANTS (Material No. 09-002) to the interface of the applicable static discharger retainer.

 Subtask 23-61-42-420-058
 G. Installation of the Static Discharger Retainers Zone 324 (Tailplane), 326 (Rudder) and 330 (340) Trimmable Horizontal Stabilizer (Ref. Fig. 401/TASK 23-61-42-991-002)
 (1)
 Put the static discharger retainer (2) in position and install it with the (4 off) rivets (1).

 (2)
 Put the static discharger retainer (4) in position and install it with the (4 off) rivets (3).

 1EFF : ALL 1 23-61-42Page 420 1 1 Feb 01/01 1 1 1CES 1 1EFF : ALL 1 23-61-42Page 421 1 1 Feb 01/01 1 1 1CES 1

 (3) Put the static discharger retainer (6) in position and install it with the (4 off) rivets (5).
 (4) Put the static discharger retainer (24) in position and install it with the (4 off) rivets (23).
 (5) Put the static discharger retainer (27) in position and install it with the (2 off) rivets (25) and the (2 off) rivets (26).
 (6) Put the static discharger retainer (29) in position and install it with the (4 off) rivets (28).
 (7) Put the static discharger retainer (31) in position and install it with the (2 off) rivets (30).
R  (8) Use a clean MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026) to remove the unwanted sealant from around the applicable static discharger retainer.
 Subtask 23-61-42-420-059 
R R  H. Installation of the Static Discharger Retainers Zone 470 (480) (Engine Pylon), 531 (631), 532 (632), 533 (633) (Flap Track Fairings) (Ref. Fig. 402/TASK 23-61-42-991-003)
R  (1) Put the applicable static discharger retainer (21) in position and install it with the (6 off) rivets (22).
 (2) Put the applicable static discharger retainer (17) in position and install it with the (4 off) rivets (15) and the (2 off) rivets (16).
R  (3) Use a clean MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026) to remove the unwanted sealant from around the applicable static discharger retainer.
 Subtask 23-61-42-420-060
 J. Installation of the Static Discharger Retainers Zone 590 (690) (Ailerons) (Ref. Fig. 403/TASK 23-61-42-991-004)
 (1) Put the static discharger retainer (10) and the new washer (9) in position and install them with the (4 off) rivets (7) and the (1 off) rivet (8).
 (2) Put the static discharger retainer (14) and the new washers (13) in position and install them with the (4 off) rivets (11) and the (2 off) rivets (12).

R

R
R
(3) Use a clean MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026) to remove the unwanted sealant from around the applicable static discharger retainer.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊3(14)