R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 290 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 301-399,

 Subtask 23-73-00-865-211
 C. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------
PANEL SERVICE IDENT. LOCATION
 -------------------------------------------------------------------------------
2001VU CIDS/DEU A NORM/ MID/ LH 197RH C04
 2001VU CIDS/DEU A NORM/ MID/ RH 198RH C05
 2001VU CIDS/DEU A NORM/ AFT/ LH 173RH C06
 2001VU CIDS/DEU A NORM/ AFT/ RH 174RH C07
 2001VU CIDS/DEU B NORM/ AFT 194RH C08

R **ON A/C 106-149, 301-399, 401-499,
 4. Procedure
_________
 Subtask 23-73-00-970-050
 A. OBRM - Software Loading
 (Ref. Fig. 212/TASK 23-73-00-991-015)

 (1) On the FAP in the function-keys bar push the arrow keys until the SW LOAD key is shown.
 -push the SW LOAD key.
 -
the SW LOAD key is illuminated.

 -
the SOFTWARE LOADING page with an activated message box WAIT UNTIL ALL CIDS COMPONENTS HAVE SENT THEIR CONFIGURATION comes on.

 -after some time the message box disappears.
 NOTE : Make sure that data is shown in the IN SLOT column. If dashes
____ are shown, wait for up to 5 minutes until data replaces the dashes.
 (2) On the SOFTWARE LOADING page push the LOAD SW key.
 -the ENTER ACCESS CODE window comes on.
 -enter the access code 813 and push the ENTER key.
 -the ENTER ACCESS CODE window disappears and the message box SOFTWARE LOADING MAY LAST 5 MINUTES and additional information comes on.
 NOTE : Ignore the message CHANGE CAM NOW IF NECESSARY.
____
R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 291 1 1 Aug 01/05 1 1 1CES 1

 OBRM - Software Loading
 Figure 212/TASK 23-73-00-991-015- 13 (SHEET 1)

R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 292 1 1 Aug 01/05 1 1 1CES 1

 OBRM - Software Loading
 Figure 212/TASK 23-73-00-991-015- 23 (SHEET 2)

R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 293 1 1 Aug 01/05 1 1 1CES 1

 OBRM - Software Loading
 Figure 212/TASK 23-73-00-991-015- 33 (SHEET 3)

R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 294 1 1 Aug 01/05 1 1 1CES 1

 (3)
 On the message box push the OK key to start the software loading procedure.

 -
a message box WAIT UNTIL SOFTWARE LOADING IS COMPLETED and additional information comes on.

 -
a loading bar shows the progress of the loading procedure.

 -
after the loading is completed the message box disappears and the system does an auto restart.

 -
after the reboot, a message box SOFTWARE LOADING COMPLETED SUCCESSFULLY comes on.

 (4)
 On the message box push the OK key.

 -
the message box disappears.

 -
the SOFTWARE LOADING page is shown.

 NOTE : Make sure that the data in all fields of the SOFTWARE LOADING
____
 page are shown in green color.

 (5) On the FAP push the CABIN STATUS key.
 -the CABIN STATUS page comes on.
 5. Close-up
________
 Subtask 23-73-00-869-082
 A. Put the aircraft back to its initial configuration.
 (1) De-energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-862-002)

R 1EFF : 106-149, 301-399, 401-499, 1 23-73-00Page 295 1 1 Aug 01/05 1 1 1CES 1

 CABIN INTERCOMMUNICATION DATA SYSTEM (CIDS) - DEACTIVATION/REACTIVATION
_______________________________________________________________________ TASK 23-73-00-040-001 CIDS Director - Deactivation of one CIDS Director
 1. Reason for the Job
__________________
 Refer to the MMEL TASK: 23-73-01
 Communications
 CIDS Director

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
23-73-34-000-001 Removal of the CIDS Director (101RH,102RH) 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 31-60-00-860-001 EIS Start Procedure
 3. Job Set-up
__________ R **ON A/C 001-049, 051-099, 101-105, 201-299,
 Subtask 23-73-00-860-146
 A. Aircraft Maintenance Configuration
 (1) Make sure that the aircraft electrical cicuits are energized (Ref. TASK 24-41-00-861-002),
 (2) Get access to the avionics compartment. R
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊3(133)