__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific blanking caps
 No specific blanking plugs
 No specific circuit breaker(s) safety clip(s)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

R  **ON A/C 001-049, 051-061, 101-105,
 34-21-22-991-001 Fig. 401
R  **ON A/C 062-099, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, 34-21-22-991-001-B Fig. 401A
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-22Page 401 1201-220, 1May 01/05 1 1 1CES 1

R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220,
R  3. Job Set-up__________ **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, Subtask 34-21-22-865-050 A. Open, safety and tag this(these) circuit breaker(s): -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-212, 214-220,
R  49VU NAV/STBY/ALTM **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 16FN  F14 
R R  122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, Subtask 34-21-22-010-050 B. Remove the thermoformed cover from the center instrument panel. **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, Y04 
R  4. Procedure_________ **ON A/C 001-049, 051-061, 101-105,
 (Ref. Fig. 401/TASK 34-21-22-991-001) 

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-22Page 402 1201-220, 1May 01/05 1 1 1CES 1

 Standby Altimeter
 Figure 401/TASK 34-21-22-991-001

R 1EFF : 001-049, 051-061, 101-105, 1 34-21-22Page 403 1 1 May 01/05 1 1 1CES 1

R **ON A/C 062-099, 151-199, 201-220,
 Post SB 34-1280 For A/C 213-213,
 (Ref. Fig. 401A/TASK 34-21-22-991-001-B) R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220,
 Post SB 34-1280 For A/C 213-213,
 Subtask 34-21-22-020-050
 A. Removal of the Standby Altimeter (3FN)
 (1)
 Loosen the screws (1). Do not remove them.

 (2)
 Disengage the standby altimeter (2) from its housing.

 (3)
 Disconnect the electrical connector (6).

 (4)
 Disconnect the quick-disconnect coupling (5).

 (5)
 Remove the standby altimeter (2).

 (6)
 Put blanking caps on the disconnected electrical connectors (4) and (6).

 (7)
 Put blanking plugs on the disconnected line ends (3) and (5).

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-22Page 404 1201-220, 1May 01/05 1 1 1CES 1

 Standby Altimeter Figure 401A/TASK 34-21-22-991-001-B
R 1EFF : 062-099, 151-199, 201-220, 1 34-21-22Page 405 1 1 May 01/05 1 1 1CES 1

R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220,
 TASK 34-21-22-400-001
 Installation of the Standby Altimeter (3FN) 1. Reason for the Job__________________
 Self Explanatory 2. Job Set-up Information______________________ A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R  33-13-00-710-001 Operational Test of the Instrument and Panel Integral Lighting **ON A/C 001-049, 051-061, 101-105,
R  34-21-22-991-001 Fig. 401 **ON A/C 062-099, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, 34-21-22-991-001-B Fig. 401A 

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-22Page 406 1201-220, 1May 01/05 1 1 1CES 1

R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220,
R  3. Job Set-up__________ **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, Subtask 34-21-22-865-051
 A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NAVIGATION 導航2(105)