(2)
Install the oxygen masks in their stowage positions.
(3)
Close the doors that were opened for access.
EFF : ALL
35-32-00Page 507
CYLINDER - PORTABLE OXYGEN - INSPECTION/CHECK_____________________________________________
TASK 35-32-42-210-001
Visual Inspection of the Portable Oxygen Cylinders
R R R R R R R WARNING : MAKE SURE THAT YOU OBEY THE MANUFACTURER'S INSTRUCTIONS AND NATIONAL_______ HAZARDOUS MATERIAL REGULATIONS WHEN YOU MOVE OR KEEP THIS EQUIPMENT IN STORAGE: - CHEMICAL OXYGEN CYLINDERS - PROTECTIVE BREATHING EQUIPMENT - FIXED AND PORTABLE OXYGEN CYLINDERS. SPECIAL PRECAUTIONS ARE NECESSARY FOR THIS EQUIPMENT.
1. Reason for the Job__________________
To visually examine the portable oxygen cylinders and their stowage positions for correct condition.
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
35-32-42-991-001 Fig. 601
3. Job Set-up__________
Subtask 35-32-42-010-053
A. Get Access
(1) Loosen the quick-release clamps and remove the portable oxygen cylinders from their stowage positions.
4. Procedure_________
(Ref. Fig. 601/TASK 35-32-42-991-001)
WARNING : CLEAN THE TOOLS AND MAKE SURE YOUR HANDS ARE CLEAN TO PREVENT_______ CONTAMINATION OF THE OXYGEN SYSTEM.
35-32-42Page 601
Feb 01/05
R Portable Oxygen Cylinder Figure 601/TASK 35-32-42-991-001
EFF : ALL 35-32-42 Page 602 Aug 01/98
CES
Subtask 35-32-42-210-050
A. Do a visual inspection of the portable oxygen cylinders.
(1)
make sure that the cylinders are clean,
(2)
examine the cylinder for dents, scratches, cracks, distortion and corrosion,
(3)
make sure that the protective treatment is not damaged,
(4)
examine the pressure regulator for damage and make sure that it is clean and correctly attached,
(5)
examine the pressure gage for damage and make sure that you can read the scale,
(6)
make sure that the pressure gage shows that the cylinders are full,
(7)
examine the filling valve, the relief valves and outlet connections for correct attachment and make sure that they are clean,
(8)
examine the carrying-straps for damage and correct attachment, NOTE : If one or more of the inspections is not satisfactory, you
____ must replace the portable oxygen cylinder.
(9)
Make sure that the stowage positions and the quick release clamps are clean and in the correct condition.
5. Close-up
________ Subtask 35-32-42-410-053
A. Close Access
(1) Install the oxygen cylinders in their stowage positions and fasten the quick-release clamps.
EFF : ALL
35-32-42Page 603
Feb 01/05
R
CES
TASK 35-32-42-210-002
Visual Inspection of the Portable Oxygen Cylinders for the Correct Pressure
R R R R R R R WARNING : MAKE SURE THAT YOU OBEY THE MANUFACTURER'S INSTRUCTIONS AND NATIONAL_______ HAZARDOUS MATERIAL REGULATIONS WHEN YOU MOVE OR KEEP THIS EQUIPMENT IN STORAGE: - CHEMICAL OXYGEN CYLINDERS - PROTECTIVE BREATHING EQUIPMENT - FIXED AND PORTABLE OXYGEN CYLINDERS. SPECIAL PRECAUTIONS ARE NECESSARY FOR THIS EQUIPMENT.
1. Reason for the Job__________________
To make sure that the portable oxygen cyinders are at the correct pressure.
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
CMM 353155 35-32-42-991-004 Fig. 602
3. Job Set-up__________
Subtask 35-32-42-010-050
A. Get access to the portable oxygen equipment in the passenger compartment.
4. Procedure_________
(Ref. Fig. 602/TASK 35-32-42-991-004)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM OXYGEN 氧氣(173)
