Emergency Oxygen Containers Figure 401/TASK 35-21-41-991-001- 22 (SHEET 2)
R EFF : 001-049, 051-099, 101-149, 201-299, 35-21-41 Page 405 May 01/05
CES
Emergency Oxygen Containers Figure 401A/TASK 35-21-41-991-001-A12 (SHEET 1)
R EFF : 151-199, 301-399, 401-499, 35-21-41 Page 406 Aug 01/05
CES
Emergency Oxygen Containers Figure 401A/TASK 35-21-41-991-001-A22 (SHEET 2)
R EFF : 151-199, 301-399, 401-499, 35-21-41 Page 407 Aug 01/05
CES
Installation Position of the Emergency Oxygen Container Figure 402/TASK 35-21-41-991-003
R EFF : CES ALL 35-21-41 Page 408 Feb 01/00
(1) Disconnect the electrical connectors (15) with the insertion/removal tool M15.570-20.
CAUTION : MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU
_______ DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
(2)
Put blanking caps on the disconnected electrical connectors.
(3)
Remove the screws (17) and the washers (16).
(4)
Loosen the screws (18).
(5)
Move the support (12) and disengage the oxygen container (13) from the support assembly (14).
(6) Remove the oxygen container (13).
**ON A/C 001-049, 051-099, 101-149, 201-299,
Subtask 35-21-41-020-052-A
C. Remove the emergency oxygen container in the lavatories. R (1) In the lavatory A only:
(a) Remove the screws (19) and the washers (20) at the O2-Box cover color panel (21).
(b)
Remove the O2-Box cover color panel(21). R (2) For the lavatories D and E only:
(a)
Put a stepladder in front of the lavatories. R (3) For all of the lavatories:
(a) Disconnect the electrical connectors (7) with the insertion/removal tool M15.570-20.
CAUTION : MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU
_______ DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
(b) Put blanking caps on the disconnected electrical connectors.
EFF : ALL
35-21-41Page 409
(c) Remove the screws (5), the washers (6) and remove the oxygen container (11).
R **ON A/C 151-199, 301-399, 401-499,
Subtask 35-21-41-020-052-B
C. Remove the emergency oxygen containers in the lavatories.
(1)
Remove the caps (10).
(2)
Remove the screws (9) and open the access cover (8).
(3)
Disconnect the electrical connectors (7) with the insertion/removal tool M15.570-20.
CAUTION : MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU
_______ DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
(4)
Put blanking caps on the disconnected electrical connectors.
(5)
Remove the screws (5), the washers (6) and remove the oxygen container (11).
**ON A/C ALL
5. Close-up
________
Subtask 35-21-41-481-050
A. If you remove the container for storage or transport, use the Material and Tool Kit (280033-01) and a Safety Pin Insertion Tool (995022-00) to install the relevant saftey pin on the oxygen generator.
EFF : ALL
35-21-41Page 410
TASK 35-21-41-400-001
Installation of the Emergency Oxygen Containers
WARNING : MAKE SURE THAT YOU OBEY THE MANUFACTURER'S INSTRUCTIONS AND NATIONAL
_______ HAZARDOUS MATERIAL REGULATIONS WHEN YOU MOVE OR KEEP THIS EQUIPMENT IN STORAGE:
-CHEMICAL OXYGEN CYLINDERS
-PROTECTIVE BREATHING EQUIPMENT
-FIXED AND PORTABLE OXYGEN CYLINDERS. SPECIAL PRECAUTIONS ARE NECESSARY FOR THIS EQUIPMENT.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific insertion/removal tool M15.570-20 98A25207503000 1 PULLEY ASSEMBLY - SEALING CORD 995000 1 TOOL - MANUAL RELEASE
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM OXYGEN 氧氣(67)
