(9) Installation of the Thermal Blankets on the Blocker Door Latch (Ref. Fig. 404/TASK 78-31-19-991-305)
(a) Put the thermal blanket (35) in place on the blocker door latch (15).
(b) Put the thermal blanket (30) in place on the other side of the blocker door latch (15).
(c) Wind the strap on blanket (30) around the blanket (35).
(d) Make sure the two thermal blankets (30) and (35) fully touch the blocker door latch (15).
F 『 EEFF : ALL E Page 41178-31-19
E E Aug 01/04 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
(e) Tie the two blankets (30) and (35) together using lockwire 0.032 in. (0.8 mm) dia (Material No. CP8001) or lockwire 0.032 in. (0.8 mm) dia (Material No. CP8002).
(f) Put the thermal blanket (40) on the blocker door latch (15). It should cover the blankets (30) and (35).
(g) Turn the Dzus fastener on the blanket (40) 1/4 turn to lock it.
5. Close-up
________ Subtask 78-31-19-080-050
A. Remove the safety sleeve (HIX3005) from the blocker door actuator
(Ref. TASK 78-32-41-080-001).
Subtask 78-31-19-860-050
B. Moving of the blocker doors CAUTION : BLOCKER DOOR LATCH MUST BE OPENED WHEN YOU CLOSE THE BLOCKER
_______
DOOR OR DAMAGE CAN OCCUR.
(1) Manually move the blocker doors to the closed position (Ref. TASK 78-32-41-860-002).
Subtask 78-31-19-440-050
C. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041). Subtask 78-31-19-410-050
D. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Close the fan cowl doors (Ref. TASK 71-13-00-410-040):
FOR 1000EM1
437AL, 438AR
FOR 1000EM2
447AL, 448AR
(3) Remove the access platform(s).
(4) Remove the warning notice(s).
F 『 EEFF : ALL E Page 41278-31-19
E E Aug 01/04 ERE
ECES E
F 『
E C F M E
E E
E 56-5B E
E E
Subtask 78-31-19-710-050
E. Bleed the air from the thrust reverser hydraulic system (Ref. TASK 78-30-00-710-040).
F 『 EEFF : ALL E Page 41378-31-19
E E Aug 01/04 ERE
ECES E LATCH - BLOCKER DOOR (3002KM1,3002KM2,3002KM3,3002KM4) - INSPECTION/CHECK
F 『
E C F M E
E E
E 56-5B E
E E
_________________________________________________________________________
TASK 78-31-19-210-040
Detailed Visual Inspection of the Blocker Door Latches, Hinges and Adjacent Structure (3002KM1,3002KM2,3002KM3,3002KM4,)
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice No specific access platform 1 m (3 ft. 3 in.) HIX3005 1 SAFETY SLEEVE - PIVOTING DOOR ACTUATOR
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors 71-13-00-410-040 Closing of the Fan Cowl Doors 78-30-00-081-041 Make the Thrust Reverser Serviceable after
Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for Maintenance 78-31-19-000-001 Removal of the Blocker Door Latches (3002KM1,3002KM2,3002KM3,3002KM4) 78-31-19-400-001 Installation of the Blocker Door Latches (3002KM1,3002KM2,3002KM3,3002KM4) 78-32-11-000-002 Removal of the Left or Right Half Door of Thrust Reverser 78-32-11-400-002 Installation of the Left or Right Half Door of Thrust
Reverser 78-32-41-000-003 Removal of the Latch Fitting and Latch Back Plate 78-32-41-080-001 Removal of the Safety Sleeve from Blocker Door
Actuator
F 『 EEFF : ALL E Page 60178-31-19
E E Feb 01/98 E E ECES E -------------------------------------------------------------------------------
F 『
E C F M E
E E
E 56-5B E
E E
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
78-32-41-400-003 Installation of the Latch Fitting and Latch Back
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 1(62)
