F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 C. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041). Subtask 78-31-41-410-056
 D. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.

 (2) Close the fan cowl doors: (Ref. TASK 71-13-00-410-040)
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 (3) Remove the access platform(s).

 (4) Remove the warning notice(s).

 F 『 EEFF : ALL E Page 61078-31-41
 E E Feb 01/98 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 TASK 78-31-41-210-003
 Detailed Visual Inspection of the Door Actuator
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific warning notice
 No specific access platform 1 m (3 ft. 3 in.)
 HIX3005 1 SAFETY SLEEVE - PIVOTING DOOR ACTUATOR

 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
 71-13-00-410-040 Closing of the Fan Cowl Doors
 78-30-00-081-041 Make the Thrust Reverser Serviceable after

 Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for Maintenance 78-31-41-000-001 Removal of the Blocker Door Hydraulic Actuator (3001KM1,3001KM2,3001KM3, 3001KM4) 78-31-41-400-001 Installation of the Blocker Door Hydraulic Actuator (3001KM1,3001KM2,3001KM3, 3001KM4) 78-32-41-080-001 Removal of the Safety Sleeve from Blocker Door Actuator 78-32-41-480-001 Installation of the Safety Sleeve on Blocker Door
 Actuator
 78-32-41-860-001 Manual Deployment of the Blocker Door
 78-32-41-860-002 Manual Stowing of the Blocker Door
 78-36-00-010-040 Opening of the Thrust Reverser Doors
 78-36-00-410-040 Closing of the Thrust Reverser Doors
 78-31-41-991-306 Fig. 601
 78-31-41-991-307 Fig. 602

 F 『 EEFF : ALL E Page 61178-31-41
 E E Feb 01/98 E E ECES E E 56-5B E

 F  『
 E  C F M  E
 E  E

 E E

 3. Job Set-up
__________
 Subtask 78-31-41-941-055

 A. Safety Precautions
 (1) On the center pedestal, on the ENG panel 115VU:

 (a) Put a warning notice to tell persons not to start the engine.

 (2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.

 (3) On the overhead maintenance panel 50VU:

 (a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.

 (b) Put a warning notice to tell persons not to energize the FADEC 1(2).

 Subtask 78-31-41-010-056
 B. Get Access
 (1) Open the fan cowl doors: (Ref. TASK 71-13-00-010-040)
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 (2) Put the access platform in position .
 Subtask 78-31-41-040-054

 C. Make the thrust reverser system unserviceable (Ref. TASK 78-30-00-481-041).
 Subtask 78-31-41-860-052
 D. Open the blocker door manually (Ref. TASK 78-32-41-860-001).
 Subtask 78-31-41-480-051

 E. Install the SAFETY SLEEVE - PIVOTING DOOR ACTUATOR (HIX3005) on blocker door actuator (Ref. TASK 78-32-41-480-001) .
 F 『 EEFF : ALL E Page 61278-31-41
 E E Feb 01/98 E E ECES E Subtask 78-31-41-010-057

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 F. Open the thrust reverser doors (Ref. TASK 78-36-00-010-040):
 FOR 1000EM1
 451AL, 452AR
 FOR 1000EM2
 461AL, 462AR.

 4. Procedure
_________
 (Ref. Fig. 601/TASK 78-31-41-991-306, 602/TASK 78-31-41-991-307)
 Subtask 78-31-41-210-052
 A. Do a visual inspection of the clevis, the clevis access door, and the blocker door actuator as follows :
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護(hù)手冊 AMM EXHAUST 1(74)