(b)  
Push the LSK adjacent to the <CONTINUE to start the surface test.

 (c)  
During this test, follow the instructions and push the LSK adjacent to <CONTINUE as shown on the CDU.

 (d)  
Make sure that the surface test is completed with no failure (Fig. 502).

 NOTE: If a failure occurs, the test will stop and the TEST
____ FAILED indication will show on the CDU display.
 (e)  If a failure occurs, do these steps:
 1)  From the CDU display, make a note of the test name, the channel, and the LRU that caused the failure.
 NOTE: The number XX.YY at the far right end of the second
____ line is the Group Number and Library Test number. the first two digits are the Group number and the last two digits are the Library number.
 2)  If it is necessary to do the surface test again, push the LSK adjacent to RERUN>.
 3)  To get the test result data, use the CDU keyboard to put the engineering code 100 into the scratchpad. Push the LSK 6R.
 4) To get out of the test result data, push the E key on the CDU keyboard. Push the LSK 6R. 5) Push the LSK adjacent to the <CONTINUE to continue the surface test.
 (f)  
If no failure occurs, the CDU display shows *DFCS TEST PASSED*.

 (g)  
Push the LSK adjacent to <CONTINUE to show *END OF DFCS BITE*.

 (h)  
Push the LSK adjacent to the <INDEX to return to the CURRENT STATUS Additional Tests Selection page.

 G.  Flight Director Test (Group 12)
 S 745-007
 (1)  
Push the LSK adjacent to <FLIGHT DIRECTOR to start the flight director interactive and surface tests.

 S 745-008

 (2)  
Do the steps 2.F.(2) thru 2.F.(3) again for the flight director interactive and surface tests.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 22-11-01
 ú ú 02 Page 513 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 H. Mach Trim Tests (Group 13)
 S 745-009
 (1)  
Push the LSK adjacent to <MACH TRIM to start the mach trim surface test.

 S 745-174

 (2)  
Do the step 2.F.(3) again for the mach trim surface test.

 NOTE:____There is no Mach Trim Interactive Test. The DFCS BITE will go directly to the Mach Trim Surface Test.
 I. Speed Trim Tests (Group 14)
 S 745-010
 (1)  
Push the LSK adjacent to <SPEED TRIM to start the speed trim interactive and surface tests.

 S 745-175

 (2)  
Do the steps 2.F.(2) thru 2.F.(3) again for the speed trim
 interactive and surface test.

 J. Altitude Alert Test (Group 15)
 S 745-011
 (1)  
Push the LSK adjacent to <ALTITUDE ALERT to start the altitude alert interactive test.

 S 745-012

 (2)
Do the step 2.F.(2) again for the altitude alert interactive test.

 NOTE:____There is no altitude alert surface test. The BITE will go directly to * END OF DFCS BITE *.
 K. Put the Airplane Back to Its Initial Condition
 S 865-014
 (1)  
Push one of the two autopilot disconnect switches.

 S 865-013

 (2)  
Close the AURAL WARN circuit breaker on the P6-2 Circuit Breaker Panel.

 S 865-015

 (3)  
Close the STAB TRIM circuit breaker on the P18-0 Circuit Breaker Panel.

 S 745-016

 (4)  
Push the INIT/REF key on the FMCS CDU keyboard to get out of the BITE.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 22-11-01
 ú ú 02 Page 514 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 865-017
 (5)  
Remove hydraulic power if it is not necessary (AMM 29-15-00/201).

 S 865-018

 (6)  
Remove electrical power if it is not necessary (AMM 24-22-00/201).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 自動飛行 AUTOFLIGHT 1(120)