(m)  
Make sure that the A and B sides of the pin J4B-22 show GD.

 (n)  
Push the LSK adjacent to INDEX> to go back to the Discrete Input Words Index.

 (o)  
Push the LSK adjacent to DISINWD 07>.

 (p)  
Push the LSK adjacent to <CONTINUE until the CDU display shows the pin J4B-53.

 (q)  
Make sure that the A and B sides of the pin J4B-53 show OP.

 (r)  
Push the INIT/REF key on the CDU keyboard to get out of the BITE.

 M. Baro Input Test
 S 735-062
 (1)  Do the baro input test:
 (a)  Adjust the BARO set on the captain's and first officer's altimeter to the nearest 100-foot increment of the field elevation.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 22-11-01
 ú ú 05 Page 530 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (b)  
Set the MCP altitude to the same altitude as shown on the altimeters.

 (c)  
Adjust the captain's altimeter to 400 feet above the MCP altitude.

 (d)  
Set the captain's flight director to the ON position.

 (e)  
Make sure that ALT ACQ does not show on the captain's EADI.

 (f)  
Adjust the captain's altimeter to 200 feet above the MCP altitude.

 (g)  
Make sure that ALT ACQ shows on the captain's EADI.

 (h)  
Set the captain's flight director to the OFF position.

 (i)  
Adjust the captain's altimeter to 400 feet above the MCP altitude.

 (j)  
Adjust the first officer's altimeter to 400 feet above the MCP altitude.

 (k)  
Set the captain's flight director to the ON position.

 (l)  
Make sure that ALT ACQ does not show on the captain's EADI.

 (m)  
Adjust the first officer's altimeter to 200 feet above the MCP altitude.

 (n)  
Make sure that ALT ACQ does not show on the captain's EADI.

 (o)  
Set the captain's flight director to the OFF position.

 (p)  
Set the first officer's flight director to the ON position.

 (q)  
Make sure that ALT ACQ shows on the first officer's EADI.

 (r)  
Set the first officer's flight director to the OFF position.

 (s)  
Adjust the first officer's altimeter to 400 feet above the MCP altitude.

 (t)  
Set the first officer's flight director to the ON position.

 (u)  
Make sure that ALT ACQ does not show on the first officer's EADI.

 (v)  
Adjust the captain's altimeter to 200 feet above the MCP altitude.

 (w)  
Make sure that ALT ACQ does not show on the first officer's EADI.

 (x)  
Set the first officer's flight director to the OFF position.

 N. Sensor Switching Tests
 S 745-165
 (1)  Do the IRS switching for FCC-A and FCC-B:
 (a)  Set all instrument transfer switches to NORMAL position.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 22-11-01
 ú ú 05 Page 531 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (b)  
Push the INIT/REF key on the CDU keyboard to show the POS INIT page or PERF INIT page.

 (c)  
Push the LSK adjacent to <INDEX to show the INIT REF INDEX 1/1 page.

 (d)  
Push the LSK adjacent to MAINT> to show the MAINT BITE INDEX 1/1 page.

 (e)  
Push the LSK adjacent to <DFCS to show the DFCS BITE TEST LINE MAINT 1/2 page.

 (f)  
Push the NEXT PAGE key on the CDU keyboard to show the DFCS BITE TEST OVERNIGHT MAINT 2/2 page.

 (g)  
Push the LSK adjacent to <SENSOR VALUES to show the Sensor Values Test Index.

 (h)  
Push the LSK adjacent to <DISCRETE INPUT WORDS to get access to the Discrete Input Words Index.

 (i)  
Push the LSK adjacent to DISINWD 06>.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 自動飛行 AUTOFLIGHT 1(129)