B. Procedure
S 864-002
(1)
Push and turn the head of the fuel measuring stick.
(2)
Lower the fuel measuring stick until you can see the drip hole.
S 494-003
(3)
Put a plug in the drip hole on the head if there is fuel in the fuel tank.
(4)
Lower the fuel measuring stick fully.
(5)
Loosen the retaining screws on the bayonet.
(6)
Remove one retaining screw.
S 864-038
S 864-004
S 034-005
S 034-006
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-41-11
ALL ú ú 01 Page 401 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
HEAD
Fuel Measuring Stick Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-41-11
ALL ú ú 02 Page 402 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
DOOR
STICK
Fuel Measuring Stick Installation Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-41-11
ALL ú ú 02 Page 403 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 034-007
(7) Hold the bayonet against the spring pressure and remove the other retaining screw.
NOTE: The spring supplies a force of approximately 5 pounds.
____
S 024-008
(8)
Pull the fuel measuring stick and the bayonet free of the bottom wing surface.
S 034-009
(9)
Remove the locking pin from the fuel measuring stick.
S 034-010
(10)
Remove the bayonet from the fuel measuring stick.
TASK 28-41-11-004-011
3. AIRPLANES WITH THE MAGNETIC FLOAT TYPE OF FUEL MEASURING STICKS;________________________________________________________________ Fuel Measuring Stick Removal (Fig. 401)____________________________
A. Equipment
(1) One of these tools (to remove the retainer):
(a)
Pliers - Snap ring
(b)
T5-0497K - spanner wrench, to install the retainer in the housing - drawing available from Kaiser Electroprecision, 17000 South Red Hill Avenue, Irvine, CA 92714 for local fabrication
B. Access
(1) Location Zones
305 Left Fuel Tank
405 Right Fuel Tank
C. Procedure
S 864-012
(1)
Turn the screwdriver slot counterclockwise to release the applicable fuel measuring stick (Fig. 401).
S 034-013
(2)
Use the snap ring pliers or the T5-0497K spanner to remove the retainer from the mounting base (Fig. 402).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-41-11
ALL ú ú 03 Page 404 ú Jul 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 024-014
(3) Pull the stick subassembly from the housing with the retainer, the spring, and the two guides.
NOTE: You can feel a small force when the steel armature on the
____ stick subassembly goes through the magnet in the float.
S 034-015
(4)
Remove the latch from the stick subassembly.
S 864-016
(5)
Keep the latch for installation of the fuel measuring stick.
TASK 28-41-11-404-036
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 燃油 FUEL 3(108)
