(b)  
Connect the dry filtered air supply to the hose.

 S 172-017
 (15) Flush the captain's static system at these locations:
 (a)  
The static hose that you disconnected from the combined standby altimeter/airspeed indicator.

 (b)  
The static hose that you disconnected from air data computer No. 1.

 (c)  
The static line that you disconnected from drain fitting No. 2 located on the at left side of the E1 rack.

 (d)  
The static line that you disconnected from drain fitting No. 11 located at the forward end of the nose wheel well.

 (e)  
Disconnect the alternate static system line from the captain's static source selector valve.

 (f)  
Put the source selector valve in the ALTERNATE position.

 (g)  
Flush the line.

 (h)  
Return the valve to the NORMAL position.

 NOTE: Do not connect the line to the source selector valve at
____
 this time.

 S 082-041
 (16) Disconnect the air supply:
 (a)  Remove the dry filtered air supply.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT EFIS ú
 34-11-00

 ú ú 03 Page 204 ú Nov 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (b)  Replace the cap on the static hose.
 S 482-020
 (17) Connect the air supply:
 (a)  
Remove the cap from the hose that you disconnected from the top left pitot-static probe.

 (b)  
Connect the dry filtered air supply.

 S 172-021
 (18) Flush the captain's static system at these locations:
 (a)  
The static line disconnected from drain fitting No. 11 located on the forward end of the nose wheel well.

 (b)  
The static line disconnected from the lower right pitot static probe.

 S 082-023
 (19) Disconnect the air supply:
 (a)  
Disconnect the dry filtered air supply from the hose that you disconnected from the top left pitot-static probe.

 (b)  
Replace the cap on the hose.

 S 482-024
 (20) Connect the air supply:
 (a)  
Remove the cap from the static hose that you disconnected from the static source selector valve.

 (b)  
Connect the dry filtered air supply to the hose.

 S 172-025
 (21) Flush first officer's static system at these locations:
 (a)  
The static hose that you disconnected from air data computer No. 2.

 (b)  
The static line that you disconnected from drain fitting No. 9 located on the right side of the E1 rack.

 (c)  
Disconnect the alternate static system line from the first officer's static source selector valve.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT EFIS ú
 34-11-00
 ú ú 03 Page 205 ú Nov 15/95

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (d) (e) (f)  Put the source selector valve in the ALTERNATE position.Flush the valve.Put the source selector valve to the NORMAL position.
 NOTE:____ Do not connect the static line to the source selector valve at this time.
 (g)  The static line that you disconnected from drain fitting No. 6 located on the at forward end of nose wheel well.

 S 082-026
 (22) Disconnect the air supply:
 (a)  
Disconnect the the dry filtered air supply from the static hose that you disconnected from the static source selector valve.

 (b)  
Replace the cap on the hose.

 S 482-028
 (23) Connect the air supply:
 (a)  
Remove the cap from the static hose that you disconnected from the top right pitot-static probe.

 (b)  
Connect the dry filtered air supply.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 1(13)