曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 C.  The standby altimeter is a drum-pointer type having a range of -1000 to 50,000 feet. The pointer, which indicates feet in hundreds, move, once around the dial for each 1000 feet of altitude. The drums display feet in thousands and hundreds. Indicators on the face of the altimeter show barometric pressure in inches of mercury and millibars. The barometric pressure is set by rotating the knob on the front of the instrument. An instrument vibrator is provided in the altimeter to shake the instrument to prevent errors caused by mechanical linkage friction. Power to the vibrator is supplied through a circuit breaker on panel P18.
 D.  The standby airspeed/altimeter indicator provides barometric corrected potentiometer signals to the cabin pressurization system (Chapter 21-31-00).
 5.  AIRPLANES WITHOUT EIS; Total Air Temperature/Static Air Temperature/True Airspeed Indicator____________________________________________________________________
 A.  The total air temperature/static air temperature/true airspeed (TAT/SAT/TAS) indicator is a digital type display of these flight parameters. The indicator is mounted on the first officers panel and presents the information as a liquid crystal display (LCD) (Ref Fig. 1).
 B.  The TAT, SAT, and TAS displays are selected individually one at a time by pressing the pushbutton on the front of the indicator and the displays appear in the order listed. The range of each display is as follows:
 TAT -99°C to +50°C
 SAT -99°C to +60°C
 TAS 130 to 599 KNOTS
 The digital data for the indicator is supplied from digital air data computer No. 1 on digital data bus No. 2 (Ref Fig. 4 and 5).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 34-12-01
 ú ú 16 Page 15 ú Nov 12/99

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 6.  AIRPLANES WITH EIS; Total Air Temperature Indication
________________________________
 A.  The total air temperature is displayed on the EIS secondary display on the pilots' center instrument panel. The display is a liquid crystal display. The digital data for the display is supplied from digital air data computer No. 1 on digital bus No. 2 (Ref Fig. 4 and 5).
 7.  Total Air Temperature Probe (Fig. 1 and 4)
___________________________
 A.  The outside air temperature probe contains non-inductive resistive transducer sensing elements and an anti-icing heater. Temperature variations of the slipstream airflow through the probe and sensor causes the element resistance to vary. The TAT (total air temperature) probe provides air temperature data to the digital air data computers and the flight data recorder. In flight, heating of the probe assembly is controlled by a switch on the pilots' overhead panel (Ref 30-31-00).
 8.  Digital Air Data Computer (Fig. 1, 4 and 5)
_________________________
 A.  The digital air data computer (DADC) is a solid-state device that uses pitot static pressure and air temperature inputs to compute air data information required by airplane displays and systems. In addition to the above inputs, 115-volt ac and 26-volt ac are provided to multipin connectors at the rear of the computer.
 B.  The computer consists of two pressure transducers, 11 plug-in printed circuit cards, a power supply and chassis assembly. The front panel (Fig. 1) provides two switches for self-test actuation, a self-test indicator light, a fault isolation test connector for off-aircraft trouble shooting and pitot static pressure input connectors. Two electrical connectors mounted on the back of the chassis provide interconnection with the airplane wiring.
 C.  The TEST SELECT switch manually selects built-in test to be performed as follows: FUNCTION - transmits fixed values on all the computer signal output lines. SLEW - sets altitude rate to 600 feet per minute. FAIL - activates all failure warning outputs.
 The PUSH TO TEST pushbutton switch initiates the built-in test and the TEST VALID WHEN LIT indicator light comes on within 2 seconds after manually activated test is successfully completed and remains on if there is no failure.
 9.  Operation
_________
 A.  General
 (1)  
The air data computer system is depicted in the block diagrams (Fig. 2 and 3), system schematic (Fig. 4) and system interface diagrams (Fig. 5, 6 and 7).

 (2)  
Power input to DADC No. 1 is shown on Fig. 4 and is supplied from P18 circuit breaker panel. Power input to DADC No. 2 is shown on Fig. 7 and is supplied from P6 circuit breaker panel.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 1(79)