S 024-004

 (3)
Remove the unit (the hinge assembly and the air inlet door):

 (a)  Remove the nuts, washers and bolts that connect the pushrod bearings to the actuator arms (Fig. 401).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-15-22
 ALL  ú ú 02 Page 401 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / GTCP85-129 SERIES /737-300/400/500/ ENGINES/MAINTENANCE MANUAL ////////////////////////
(b)  
Remove the two pushrod bearings from the two pushrods.

 (c)  
Remove the nut from the inboard end of the pushrod for the vortex generator flap (Fig. 402).

 (d)  
Remove the screws that attach the hinge assembly to the airplane (Fig. 403).

 NOTE: Get the access to the screws from the outer side of the
____
 airplane.

 (e)  Carefully remove the unit (the hinge assembly and the air inlet door).
 NOTE: When you remove the unit, you must remove the nuts
____ between the barrel fitting and grommet in the duct. (Fig. 402).
 S 034-005
 (4) Remove the hinge assembly from the air inlet door (Fig. 403):
 (a)  
Remove the hinge pin, washers and cotter pin that attach the hinge assembly to the air inlet door.

 (b)  
Remove the hinge assembly from the air inlet door.

 TASK 49-15-22-404-006
 3. Air Inlet Door Installation
___________________________
 A. Consumable Materials
 (1)  D00015 Grease - BMS 3-24
 B. References
 (1)  
AMM 49-15-00/501, APU Air Inlet

 (2)  
AMM 49-15-22/301, Air Inlet Door

 C. Access
 (1)  Location Zones
 101 Control Cabin (Left)
 205 Electronic Compartment
 701 Tail Compartment

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-15-22
 ALL  ú ú 02 Page 402 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
SEE  A 
AIR DIFFUSER DUCT 
SEE  B 
VORTEX 
GENERATOR 
AIR INLET DOOR 
A  FWD
PRESSURE 
BULKHEAD 
AIR 
INLET 
DOOR 
AIR DIFFUSER DUCT

 FWD
ACTUATOR SEE C
B
Air Inlet Door Installation - Actuator Pushrod Connection Figure 401 (Sheet 1)
A50726
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-15-22
 ALL  ú ú 02 Page 403 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / GTCP85-129 SERIES /737-300/400/500/ ENGINES /MAINTENANCE MANUAL ////////////////////////
PUSHROD (2 LOCATIONS)
ACTUATOR
SEE D
ACTUATOR
PUSHROD ARM
BEARING (2 LOCATIONS)
(2 LOCATIONS)

C
BOLTWASHER
ACTUATOR ARM
PUSHROD BEARING
WASHER
NUT
D
Air Inlet Door Installation - Actuator Pushrod Connection
Figure 401 (Sheet 2)

A50728
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-15-22
 ALL  ú ú 02 Page 404 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.

VORTEX

INBD
Air Inlet Door Installation - Pushrod Connection for the Vortex Generator Flap Figure 402
A50743
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 AIRBORNE AUXILIARY POWER 1(135)