(6)  CMCS Ground Test
 (a)  A ground test of the CPCS may be initiated with the central maintenance computer system. The test will isolate any faults in the CPCS to the failed LRU.
 B. Control
 (1)  
Normally operation of the CPCS is automatic. No control functions are exercised.

 (2)  
The CPCS may be placed in manual mode if there is a failure of the automatic system. Outflow valve position is controlled by pressing the MAN-L or MAN-R switch on the CPCS selector panel and holding the OPEN-CLOSE toggle switch to the desired direction. Outflow valve position may be observed on the selector panel indicators or on the ECS synoptic page of the auxiliary EICAS.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-31-00
 ALL  ú ú 11 Page 16 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 CABIN PRESSURE CONTROL SYSTEM - ADJUSTMENT/TEST
_______________________________________________
 1.  General_______
 A. This procedure has instructions to do the tasks that follow:
 -Cabin Pressure Control System (CPCS) Ground Test
 -Overboard Valve System Ground Test
 -System Test - Cabin Pressure Control System
 -Operational Check of the Outflow Valve and Manual Mode Control
 -Functional Check of the Controller Analog Sensor
 (1)  
The system test consists of these tests:

 -CPCS Ground Test
 -Overboard Valve System Ground Test
 -CPCS Manual Mode Test
 -ICU Altitude Switch Test
 -
CPCS EICAS Messages Test

 -
CPCS Backup Sensor Test

 -Landing Altitude Display Test
 -
Cabin Altitude Display and Warning Test

 -
Cabin Altitude Sensors Disagreement Test

 -Forward Overboard Valve Test

 (2)  
The Operational Check of the Outflow Valve and Manual Mode Control is a scheduled maintenance task. It is the same as the CPCS Manual Mode Test.

 (3)  
The Functional Check of the Controller Analog Sensor is a scheduled maintenance task. It is the same as the Cabin Altitude Display and Warning Test and the Cabin Altitude Sensors Disagreement Test.

 (4)  
The cargo fire control decompression system test is a scheduled maintenance task.

 TASK 21-31-00-715-001
 2.  Cabin Pressure Control System (CPCS) Ground Test________________________________________________
 A. General
 (1)  The ground test of the cabin pressure control system commands the applicable cabin pressure controller to do a self-test of its internal components. If the test fails, the test will stop.
 B. References
 (1)  AMM 24-22-00/201, Manual Control
 C. Access
 (1)  Location Zone
 221 Control Cabin, LH
 222 Control Cabin, RH

 D. Prepare for the Test
 S 865-002
 (1)  Supply electrical power (AMM 24-22-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-31-00
 ALL  ú ú 04 Page 501 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 865-096
 (2)  
Make sure the MAN-L and MAN-R switch-lights, on the overhead panel, P5, are in the off positions.

 S 865-084

 (3)  
Prepare the CDU for the test:

 (a)  
Push the MENU key on the CDU to show the MENU.

 (b)  
Push the line select key (LSK) that is adjacent to <CMC to show the CMC MENU.

 (c)  
If <RETURN shows after you push the LSK, push the LSK that is adjacent to <RETURN until you see the CMC MENU.

 (d)  
Push the LSK that is adjacent to <GROUND TESTS to show the GROUND TESTS menu.

 (e)  
Push the LSK that is adjacent to <CABIN PRESSURE to show the GROUND TESTS for the cabin pressure control system.

 (f)  
Push the NEXT PAGE key until you find <CPCS-A or <CPCS-B.

 NOTE: If INHIBITED shows above <CPCS-A or <CPCS-B, the
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 空調 AIR CONDITIONING 1(102)