(2)
WDM 21-43-11
(3)
SSM 21-43-01
B. Access
(1) Location Zone 121 Forward Cargo Compartment Forward Half, LH
C. Procedure
S 864-002
(1) Open the following circuit breaker for the forward cargo compartment temperature switch and attach a DO-NOT-CLOSE tag:
(a) On the P6 Main Power Distribution Panel 1) 6F32 FWD CARGO HEAT CONT
S 014-003
(2)
Remove the coverplate screws and the coverplate from the sensor assembly box.
S 034-004
(3)
Remove the electrical connector DS2014 from the temperature switch.
S 024-005
(4)
Remove the nut from the switch and remove the switch from the mounting plate.
TASK 21-43-03-404-006
3. Temperature Switch Installation_______________________________
A. Special Tools and Equipment
(1) G21001-11, Lockout Assembly - N2 Speed Card Test Switch
B. Standard Tools and Equipment
(1) Cooling Source (Ice pack or equivalent)
C. Consumable Materials
(1)
A00968 Primer DC1204
(2)
A00971 Sealant DC3145
D. References
(1) 20-11-28/401, Lockwire
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-43-03
ALL ú ú 08 Page 401 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
A
SENSOR
FORWARD CARGO COMPARTMENT
TEMPERATURE SENSOR ASSEMBLY
SWITCH
LOCKWIRE
NUT
Forward Cargo Compartment Temperature Switch Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-43-03
ALL ú ú 01 Page 402 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(2)
21-43-00/501, Forward Cargo Heat System
(3)
IPC 21-43-03 Fig. 1
(4)
WDM 21-43-11
(5)
SSM 21-43-01
E. Access
(1) Location Zone
121 Forward Cargo Compartment Forward Half, LH
F. Procedure
S 424-007
(1)
Install the temperature switch with the electrical receptacle on the top of the mounting plate and install the nut.
S 434-008
(2)
Install the lockwire between the switch and nut (Ref 20-11-28/401).
S 394-011
(3)
Apply the primer to the lockwire access hole.
S 394-017
(4)
Apply the sealant to the lockwire access hole.
S 434-012
(5)
Install the electrical connector DS2014 on the switch.
S 864-013
(6)
Remove the DO-NOT-CLOSE tag and close the following circuit breaker for the forward cargo compartment temperature switch:
(a) On the P6 Main Power Distribution Panel
1) 6F32 FWD CARGO HEAT CONT
(7)
Do the forward cargo heat system test (Ref 21-43-00/501).
S 714-015
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-43-03
ALL ú ú 08 Page 403 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
FORWARD CARGO HEAT DUCT - REPAIR
________________________________
1. General_______
A. This task gives instructions to repair the heat duct in the forward cargo compartment.
B. This task has two procedures for the repair of the heat duct while it is on the airplane:
(1)
The first procedure tells to repair a short section of the heat duct. A short segment of duct is twelve inches (305 mm) or less.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 空調 AIR CONDITIONING 1(150)
