曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 NOTE: The supply and exhaust fans are both located in the forward
____ cargo compartment. The supply fan is located behind the left-hand sidewall of Sta 560. The exhaust fan is located behind the right-hand sidewall at Sta 520.
 The fans operate at approximately 11,400 rpm.
 S 862-061
 (3)  Make sure that the following circuit breakers are closed:
 NOTE: To obtain valid data for EICAS display formats, the IDS and
____ systems which interface with the IDS must be operational. Refer to the IDS Description and Operation for the interfacing systems (AMM 31-61-00/001). Refer to the IDS Adjustment/Test for the verification of system operation (AMM 31-61-00/501).
 (a)  P7, Overhead Circuit Breaker Panel
 1) 7F8, UPR EICAS
 2) 7F9, EIU L
 3) 7F10, EIU C
 4) 7F11, EFIS CONT L
 5) 7F12, ND L
 6) 7F13, PFD L
 7) 7F14, LWR EICAS
 8) 7F15, EIU R
 9) 7F16, EFIS CONT R
 10) 7F17, ND R
 11) 7F18, PFD R

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 02 Page 204 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 12) 7C2, FMCS CDU L
 13) 7C24, FMCS CDU R

 (b)  
P414, Power Distribution Center - Left
 1) 414L8, CMC LEFT

 (c)  
P415, Power Distribution Center - Right
 1) 415L39, CMC RIGHT

 

 S 802-065
 (4)  Obtain Airplane System Information - Normal EICAS Configuration (Fig. 202)
 (a)  
Upon application of electrical power, make sure the EICAS primary and EICAS secondary formats are on the main and auxiliary DUs, respectively.

 (b)  
Press STAT key on EICAS DSP to check airplane status prior to dispatch. Make sure EICAS primary format is on main DU and EICAS status format is on auxiliary DU.

 NOTE: The triangular pointers which indicate surface positions
____ on the EICAS status page do not translate to the end of the scale when the surface is at full travel.
 (c)  
Press ENG key on EICAS DSP to view secondary engine parameters. Make sure EICAS primary format is on main DU and EICAS secondary format is on auxiliary DU.

 (d)  
Press ELEC, FUEL, ECS, HYD, DRS or GEAR key on EICAS DSP to view respective synoptic format. Make sure EICAS primary is on main DU and respective synoptic format is on auxiliary DU.

 (e)  
Select EICAS maintenance page through CDU (Fig. 202). 1) Press MENU key on CDU. Make sure main menu page is displayed. 2) Press line select key next to <CMC. Make sure the CDU displays CMC MENU page 1. 3) Press line select key next to <EICAS MAINT PAGES. Make sure the EICAS MAINT PAGES menu is displayed on CDU.

 4)  Select the desired EICAS Maintenance page from the EICAS MAINT PAGES menu. a) Press NEXT PAGE key on CDU to view subsequent pages of
 EICAS MAINT PAGES menu. b) Press the line select key next to the prompt for the desired maintenance page. c) Make sure the EICAS PAGE CONTROL menu for the selected maintenance page is displayed on CDU. 5) Select <DISPLAY to view the real time maintenance page format on the auxiliary DU.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 02 Page 205 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 6)  Select <RECORD to cause the IDS to take a snapshot of the real time maintenance page.
 7)  Select <MANUAL SNAPSHOTS to display a list of available manual snapshots. Press the line select key next to one of the listed flight legs to view that snapshot on the auxiliary DU.
 8)  Select <AUTO SNAPSHOTS to display a list of available automatic snapshots. Press the line select key next to one of the listed flight legs to view that snapshot on the auxiliary DU.
 9)  Press a key on the EICAS DSP to change the display on the auxiliary DU from a maintenance page to a secondary engine or synoptic format.
 (f)  
Press ENG key on EICAS DSP while EICAS secondary format is displayed on auxiliary DU. Make sure the auxiliary DU is blanked.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 指示/記錄系統 2(115)