EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-36-02
 ALL  ú ú 01 Page 403 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  
Spring Scale - 50 pound capacity, push type

 C.
References

 (1)  
IPC 52-36-02 Fig. 2

 D.
Access

 (1)  
Location Zone
 146 Bulk Cargo Compartment, RH

 (2)  
Access Panel
 823R Door - Bulk Cargo Compartment

 E.
Procedure

 S 864-016
 WARNING: DO NOT TRY TO HOLD THE BALANCE MECHANISM CABLE WITH BLOCKS AND
_______ CLAMPS. BLOCKS AND CABLES CAN LET THE CABLE MOVE. IF THE CABLE MOVES QUICKLY, IT CAN CAUSE INJURY TO PERSONNEL.
 (1)  
See that the springs in the spring tube are compressed.

 (a)  
The springs are compressed if one of these items is true: 1) A safety pin through the tube compresses the springs 2) The cable restraining tool compresses the springs 3) A wood block inside the spring tube compresses the springs.

 S 494-012
 (2)  Do these steps if the springs are not compressed (Fig 402).
 NOTE: You must compress the springs to let the cable attach
____
 to the cable drum.

 (a)  
Remove the spring tube cover on the end of the spring tube , if it is installed.

 (b)  
Use the spring cartridge assembly tool to compress the springs.

 NOTE: Make sure you compress the springs sufficiently to let
____ you attach the cable to the cable drum.
 (c)  
Use one of these alternatives to hold the springs: 1) Install a safety pin through the spring tube 2) Install the cable restraining tool.

 (d)  
Remove the spring cartridge assembly tool.

 (e)  
Install the cover on the end of the spring tube.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-36-02
 ALL  ú ú 01 Page 404 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

Spring Tube Safety Pin Hole Installation
Figure 402

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-36-02
 ALL  ú ú 01 Page 405 ú Jun 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 424-008
 WARNING: DO NOT REMOVE THE SAFETY PIN OR THE CABLE RESTRAINING
_______ TOOL WHILE YOU INSTALL THE BALANCE MECHANISM . IF YOU REMOVE THEM, THE CABLE CAN RETRACT QUICKLY. THIS CAN CAUSE INJURY TO PERSONNEL.
 (3)  
Install the balance mechanism.

 (a)  
Put the clamp around the spring tube and over the support bracket (Fig 401).

 (b)  
Install the bolt and Hi-Loks at the forward end of the tube.

 (c)  
Tighten the clamp.

 (d)  
Install the cable drum (Detail A). 1) Put the bolt and washer through the drum. 2) Engage the bolt with the nut plate on the floor beam. 3) Torque the bolt from 30 to 40 pound-inches.

 S 424-010
 WARNING: DO NOT REMOVE THE SAFETY PIN OR THE CABLE RESTRAINING
_______ TOOL WHILE YOU INSTALL THE CABLES. IF YOU REMOVE THEM, THE CABLES CAN RETRACT QUICKLY. THIS CAN CAUSE INJURY TO PERSONNEL.
 (4)  
Install the cables.

 (a)  
Connect the door cable to the cable drum. 1) Put the end fitting of the cable in the slot on the drum.

 CAUTION:_______MAKE SURE THE HEAD OF THE BOLT POINTS DOWN. THE BOLT CAN CAUSE DAMAGE TO THE CABLE IF YOU INSTALL IT INCORRECTLY.
 2) Install the cable bolt with the head down.
 (b)  Connect the cable that goes to the spring tube. 1) Put the end fitting of the cable in the slot on the drum.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 4(18)