S 644-019
(1) Apply grease to the bolt, the bushing, the washer, the nut, and the cotter pin.
32-11-09
ALL ú ú 01 Page 403 ú Jan 28/00
A
757 MAINTENANCE MANUAL
S 414-020
(2)
Install the parts to connect the stabilizer link to the structure support.
S 414-021
(3)
Install the bushing at the threaded end of the bolt.
S 434-022
(4)
Tighten the nut to 150-250 pound-inches (Detail A).
(a)
Loosen the nut to the nearest lock position to install the cotter pin.
S 644-023
(5)
Apply grease to the pin, the bolt, the end caps, the washer, the nut and the cotter pin.
S 414-024
(6)
Install the parts to connect the support link to the structure fitting.
S 434-025
(7)
Tighten the nut to 100-200 pound-inches (View B-B).
(a)
Install the cotter pin.
S 644-026
(8)
Apply grease to the bolt, the washer, the nut and the cotter pin.
S 414-027
(9)
Install the parts to connect the stabilizer link to the support link.
S 434-028
(10)
Tighten the nut to 150-250 pound-inches.
(a)
Loosen the nut to the nearest lock position to install the cotter pin.
S 644-029
(11)
Apply grease to the pin, the bolt, the end caps, the washer, the nut, and the cotter pin.
(12)
Install the parts to connect the reaction link to the support link.
S 434-031
(13)
Tighten the nut to 100-200 pound-inches (View A-A).
(a)
Install the cotter pin.
E.
Put the Airplane Back to Its Usual Condition.
(1)
Lower the airplane and remove the jacks (AMM 07-11-01/201).
S 414-030
S 584-018
32-11-09
ALL ú ú 01 Page 404 ú May 28/99
A
757
MAINTENANCE MANUAL
S 094-032 WARNING: USE THE PROCEDURE IN AMM 32-00-15/201 TO REMOVE THE DOOR LOCKS.
_______ THE DOORS OPEN AND CLOSE QUICKLY AND CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2) Remove the door locks for the landing gear and close the doors (AMM 32-00-15/201).
32-11-09
ALL ú ú 01 Page 405 ú May 28/99
A
757 MAINTENANCE MANUAL
MAIN GEAR REACTION LINK - REMOVAL/INSTALLATION
______________________________________________
1. General
_______
A. This procedure contains two tasks. The first task removes the reaction link for the main landing gear. The second task installs the reaction link for the main landing gear.
TASK 32-11-10-004-001
2. Remove the Reaction Link for the Main Landing Gear (Fig. 401)
__________________________________________________
A. Equipment
(1)
Door Lock, Landing Gear - (Ref 32-00-15)
(2)
Boom Hoist - A20001-79, -55
(3)
Thread Protector Set, MLG - B32011-14
(4)
Hoist Adapter Set, MLG - B32015-38
(5)
Crowfoot Wrench - F70312-37
B.
References
(1)
AMM 07-11-01/201, Jacking Airplane
(2)
AMM 29-11-00/201, Pressurize/Depressurize Main Hydraulic System
(3)
AMM 32-00-15/201, Landing Gear Door Locks
(4) 中國航空網(wǎng) www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：757 AMM 飛機維護手冊 起落架 CHAPTER 32 - LANDING GEAR 1(100)
