(2)
AMM 29-11-00/201, Pressurize/Depressurize Main Hydraulic System
(3)
AMM 32-00-15/201, Landing Gear Door Locks
(4)
AMM 32-00-20/201, Landing Gear Downlocks
B.
Access
(1)
Location Zones
731/741 Main Landing Gear (MLG)
732/742 MLG body doors
733/743 MLG oleo doors
C.
Prepare for the Removal of the Support Link.
S 494-002
(1) Make sure the downlocks are installed on the nose and main landing gear (AMM 32-00-20/201).
S 494-033
WARNING: USE THE PROCEDURE IN AMM/32-00-15/201 TO INSTALL THE DOOR
_______ LOCKS. THE DOORS OPEN AND CLOSE QUICKLY AND CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2)
Open the doors for the landing gear and install the door locks (AMM 32-00-15/201).
S 864-004
(3)
Remove the pressure from the left hydraulic system (AMM 29-11-00/201).
(4)
Lift the airplane (AMM 07-11-01/201).
S 584-005
32-11-09
ALL ú ú 01 Page 401 ú May 28/99
A
757
MAINTENANCE MANUAL
SEE A UPPER SUPPORT STRUCTURE
REACTION BOLT B LINK
B
DOWNLOCK
ASSEMBLY
SHOCK
SIDE STRUT STRUT
SUPPORT LINK
STABILIZER LINK BOLT
A DRAG STRUT A
REACTION
LINK
A
FWD
SIDE STRUT
REACTION UPPER SUPPORT SUPPORT LINK END CAPEND CAP
LINK STRUCTURE (2 LOCATIONS)
(2 LOCATIONS)
PIN
NUT
BOLT
BOLT NUT
WASHER
PIN
SIDE STRUT
SUPPORT LINK
A-A B-B
Main Gear Side Strut Support Link Installation
Figure 401
32-11-09
ALL ú ú 01 Page 402 ú May 28/99
A
757 MAINTENANCE MANUAL
D. Remove the Support Link.
S 844-006
(1)
Hold the reaction link to prevent movement.
S 014-007
(2)
Remove the pin to disconnect the support link from the reaction link (View A-A).
S 014-008
(3)
Remove the bolt to disconnect the stabilizer link from the support link (Detail A).
S 014-009
(4)
Remove the pin to disconnect the support link from the structure fitting (View B-B).
S 024-010
(5)
Remove the support link.
S 034-011
(6)
Remove the bolt to disconnect the stabilizer link from the structure support (Detail A).
TASK 32-11-09-404-012
3. Install the Side Strut for the Support Link on the Main Landing Gear____________________________________________________________________ (Fig. 401)
A. Consumable Materials
(1)
D00633 Grease - BMS 3-33 (Recommended)
(2)
D00013 Grease - MIL-G-23827 (Alternative)
B.
References
(1)
AMM 07-11-01/201, Jacking Airplane
(2)
AMM 32-00-15/201, Landing Gear Door Locks
C.
Access
(1)
Location Zones
731/741 Main Landing Gear (MLG)
732/742 MLG body doors
733/743 MLG oleo doors
D.
Install the Support Link.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 起落架 CHAPTER 32 - LANDING GEAR 1(99)
