曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

At the first step, the user may choose the XML manual he wants to load. The user must
select a “Product file”.
« Flight Ops Doc
Manager »
User Guide
Reference: UG0600624
Issue: 7.1
PAGE 50/276
© AIRBUS S.A.S 2009. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of AIRBUS S.A.S. No intellectual
property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express
written consent of AIRBUS S.A.S. This document and its content shall not be used for any purpose other than that for which it is supplied.
Figure 49: Load Manual Wizard, step one
The user can type the product file name and path, or use the file chooser to do the same
task by pressing the “Browse” button.
Figure 50: Load Manual Wizard, File chooser manual XML file
When the “Product file” field is filled, the “Next” button becomes enabled, and the user can
move to the next step.
« Flight Ops Doc
Manager »
User Guide
Reference: UG0600624
Issue: 7.1
PAGE 51/276
© AIRBUS S.A.S 2009. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of AIRBUS S.A.S. No intellectual
property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express
written consent of AIRBUS S.A.S. This document and its content shall not be used for any purpose other than that for which it is supplied.
With the “Cancel” button, the user leaves the Load window.
Figure 51: Load Manual Wizard, step one, XML file selection
If the manual type is AFM the user can choose to extract PSL “MCDL” from the manual and
to load it as manual.
When the user clicks on the “Next >” button a dedicated popup is displayed asking if he
wants to extract the PSL “CDL”.
Figure 52: Load Manual Wizard, step one, “Extract a CDL PSL” choice dialog box
If he clicks on “No” button, the user accesses the second step of the load process and will
load the AFM as a manual.
During this process the hascode of the manual is checked.
If he clicks on “Yes” the process of extraction is launched.
« Flight Ops Doc
Manager »
User Guide
Reference: UG0600624
Issue: 7.1
PAGE 52/276
© AIRBUS S.A.S 2009. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of AIRBUS S.A.S. No intellectual
property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express
written consent of AIRBUS S.A.S. This document and its content shall not be used for any purpose other than that for which it is supplied.
Figure 53: Load Manual Wizard, Prepare AFM to CDL process
This process will also build AAT list (the aircrafts list linked to the manual).
At any time the user can interrupt the process by pressing the cancel button.
At the end of the process the “Next” button becomes enable. The user accesses the second
step of the load process to start loading the MCDL manual.
Second step, the system evaluates the validity of the XML file corresponding to the manual
the user wishes to load.
If it is not valid, an explanatory error message shows up in the upper panel of the wizard.
« Flight Ops Doc
Manager »
User Guide
Reference: UG0600624
Issue: 7.1
PAGE 53/276
© AIRBUS S.A.S 2009. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of AIRBUS S.A.S. No intellectual
property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express
written consent of AIRBUS S.A.S. This document and its content shall not be used for any purpose other than that for which it is supplied.
Figure 54: Load Manual Wizard, step two, error message
The central panel of the wizard specifies the characteristics of the manual being loaded.
If the product file is correct, Flight Ops Doc Manager tries to detect if the manual has
already been selected:
Update: the manual is already loaded (same manual code, product code, ac-set-type, acset-
value and cuscode) in Flight Ops Doc Manager. The application will update it. An
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：“Flight Ops Doc Manager”User Guide(24)