曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

diodes required for their operation with the EPIC
system. To save space, the diodes can be mounted vertically instead of
horizontally as you would find on a full-sized EMDA card.
8
The PRO-34, provides connections for all 32 outputs available from the EPIC
Output Module. You can wire up 32 lamps, LEDs, buzzers or what-have-you
right from this tiny 6.0 x 10.6 cm (2 3/8 x 4 3/16 inch) card. To help save
space, we have designed the card so that resistors (if you need any), are
mounted vertically.
FEATURES:
Daisy-chaining plugs on every EMDA wiring interface card
Full backward-compatibility as well with older EMDA cards
1.3.3 CSI 7-Segment Displays
These little circuit boards take all the hard work out of wiring seven-segment
LED displays. All you need to add are the numeric displays of your choice.
We offer two versions of the wiring card,
accommodating the most popular sevensegment
LED choices among cockpit builders (the
QT MAN3xxxA series and Hewlett-Packard HDSPseries).
These displays come ready for you to solder on five digits. If you only require
three digits and need to keep space to a minimum, just cut two of the digits
off the left side of the card, using a hacksaw or table saw. The basic
mounting card is 2.3 x 6.2 cm (29/32 x 2 1/2 inches)
Strip apart the EPIC Display Card's ribbon cable
and solder in the segment wires at the right hand
end of the display mount. The holes are arranged in
the same order as the wires on the ribbon (A-H), to
keep the whole operation neat and simple to solder.
The commons to each digit go in the holes marked with a donut around them
(just above and to the left of the letter A on each digit). That's all there is to
the wiring!! These Seven-Segment Display Mounts are designed to work in
conjunction with the EPIC Seven-Segment Display Module, manufactured by
R&R Electronics.
1.4 Cockpit Panels
The advantage of using EPIC is the ability to send keystrokes or data to your
simulator program or use data from your simulator. To do this, you need
9
some physical hardware or panels. I use the term panels as a generic term
since panels come in all types: lighted enunciators, gangs of switches,
gauges, displays and numerous combinations of the above. One choice
you’ll need to make is what panels you need and how you will get them. I’ve
included some commercial panels below to give you a feel for what’s
available on the market, some of these companies will even sell you the
panel without the hardware or make custom panels to your drawings.
1.4.1 Advance Graphics Technologies L.L.C.
1.4.1.1 F-16 Panels
F-16C Caution Lights Panel
Dimensions
Width: 114 mm (4.5 in)
Height: 83 mm (3.25 in)
Thickness: 3.175 mm (0.125 in)
Panel Hardware:
Lighting panel, which allows each
annunciator to be illuminated
independently of the others.
F-16C Integrated Control Panel (ICP)
Dimensions
Width: 140 mm (5.5 in)
Height: 105 mm (4.125 in)
Thickness: 3.175 mm (0.125 in)
Panel Hardware:
12 illuminated, square pushbutton switches
6 illuminated, round pushbutton switches
1 nonilluminated, black pushbutton switch
3 miniature toggle switches
2 rocker switches
4 white thumbwheels (Not shown.
These
thumbwheels can be made
functional with the
addition of rheostats behind the
panel.)
10
F-16C Landing Gear Panel
Dimensions
Width: 202 mm (7.9 in)
Height: 171 mm (6.7 in)
Thickness: 3.175 mm (0.125 in)
Panel Hardware:
3 standard toggle switches
3 lever lock toggle switches
3 green indicator lamps (12VDC)
3 round pushbutton switches
Landing gear lever with integral
switches (not shown)
1.4.1.2 Commercial Aircraft Panels
Airbus EFIS Panel
Dimensions
Width: 177.8 mm (7.0 in)
Height: 101.6 mm (4.0 in)
Thickness: 3.175 mm (0.125 in)
Panel Hardware:
7 non-illuminated pushbutton switches
3 black knobs (can easily be painted to match knobs shown)
4 LED displays
1 miniature toggle switch
2 toggle switches
1 rotary encoder with integral
pushbutton switch
2 6-position rotary switches
747-400 EICAS Panel
Dimensions
11
Width: 63.50 mm (2.50 in) Height: 76.20 mm (3.00 in)
Thickness: 3.175 mm (0.125 in)
Panel Hardware:
10 non-illuminated pushbuttons
1.4.2 Aimsworth Simulations
1.4.2.1 F-16 Panels
12
1.5 Cockpits
1.5.1 Homebuilt Cockpits
Building your own cockpit can be as simple or as complex as you want to
make it. Your choice of materials will determine how hard a job your cockpit
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料17(115)