曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

construction will be. Using fiberglass or sheet metal may give a better or
more realistic look and feel; however, plywood is easier to cut and cheaper to
buy. Whether you decide to construct a cockpit or purchase one, you need
to think about how you’ll be routing your wires and whether all of your panels
will fit the way you want. I use PVC pipes to route my wiring and I fully built
my cockpit before I made any cutouts for panels.
1.5.2 Commercial Cockpits
Commercial cockpits are available and range for frontal only to a full cockpit
with canopy. Aimsworth is one company that sells F-16 cockpits in the US
and overseas.
13
Part 2: EPIC Infrastructure
2.1 Powering Modules
2.1.1 Distributed power
Many of the EPIC modules and add-on hardware require between 9 and 12
volts dc. You can purchase individual wall plug type power supplies and use
one per EPIC module and one for each Output module for the lights. This
distributed power systems has the obvious advantage of allowing you to
purchase your power supplies and simply plug them into your EPIC modules.
A disadvantage of the distributed is system is the need to run 120 volts
alternating current (vac) to each of these power plugs throughout your
simulator.
2.1.2 Central power
Another way to power you EPIC
system is via a centralized power
distribution systems. With a
centralized system, you might have
a single power supply capable of
handling all of your power needs
and you would run a cable to each
system requiring power. With a
central system, only 12vdc is run
throughout your simulator and by
using fuses, short circuits can be handled without much danger. Another
advantage to the central system is the ability to get used personal computer
power supplies that would have sufficient +12vdc and +5vdc power available
to run your EPIC system.
2.1.3 Power distribution
Whether you choose distributed or centralized, you need to determine how
you’ll get the power where it needs to go. You need to consider how to get
120vac and 12vdc/9vdc around your simulator. You need to ensure you
keep your power cable runs away from sharp objects or pinching objects that
could damage the insulation and cause a short circuit. You should also
consider keeping all of your power connections protected by shielding and
providing fuses on all power cables.

　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料17(116)