曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Transport Airplane Directorate
Aircraft Certification Service
Seattle MIDO
2500 East Valley Road, Suite C2
Renton, Washington 98055
November 27, 2001
Mr. David Rubens
Avistar Aerospace, LLC
1818 Westlake Ave. North Suite 408
Seattle, Washington 98109
Dear Mr. Rubens
We have completed our review and evaluation of your Fabrication Inspection Manual dated
March 14, 2001 and find that the submitted data complies with the intent of the Code of Federal
Regulations (CFR) Title 14, Part 21, Subpart K, §21.303(h), for your Parts Manufacturing
Approval (PMA). Your submitted data is therefore approved as of this date, except that the
Federal Aviation Administration reserves the right to require such changes, additions or
clarification as may prove necessary, as a result of subsequent inspections and evaluations, to
ensure continued compliance with appropriate regulations.
Sincerely,
Manuel Lopez
Aviation Safety Inspector (Mfg.)
Seattle Manufacturing Inspection
District Office, ANM-108S
FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURING APPROVAL
Avistar Aerospace, LLC.
1818 Westlake Ave. North, Suite 408
Seattle, WA 98109
PART NAME
PART
NUMBER
APPROVED
REPLACEMENT
FOR PART
NUMBER
APPROVAL BASIS AND
APPROVED RESIGN DATA
PMA No. PQ2364NM
Supplement No,: i
Date: November 27, 2001
MAKE
ELIGIBILITY
MODEL
ELIGIBILITY
Wobbler 725941AVS 725941 Test and Computation per
14 CFR §21.303
Dwg: 72S941AVS dated
9/13/00
Boeing
Airbus
747-400
757-200
767-200
767-300
A-300
A-310
A-320
Wobbler 757485AVS 757485 Test and Computation per
14 CFR §21.303
Dwg; 757485AVS dated
6/30/01
Boeing
Airbus
747-400
757-200
767-200
767-300
A-300
A-310
A-320
Slipper- 755333AVS 755333 Test and Computation per
Retainer 14 CFR §21,303
Dwg: 755333AVS dated
9/13/00
Boeing
Airbus
747--400
757-200
767-200
767-300
A-300
A-310
A-320
Ball-Retainer 725930AVS 725930 Test and Computation per
14 CFR §21.303
Dwg: 725930AVS dated
9/13/00
Boeing
Airbus
747-400
757-200
767-200
767-300
A-300
A-310
A-320
Retainer- 725928AVS 725928 Test and Computation per
Slipper (Set) 14 CFR §21.303
Dwg: 725928AVS dated
7/1/01
Boeing
Airbus
747-400
757-200
767-200
767-300
A-300
A-310
A-320
Gearshaft 725932AVS 725932 Test and Computation per
14 CFR §21.303
Dwg: 725932AVS dated
9/13/00
Boeing 747-400
757-200
767-200
767-300
A-300
A-310
A-320
Washer 742687AVS-1 742687-1 Test and Computation per
14 CFR §21.303
Dwg: 742687AVS dated
9/13/00
Boeing
Airbus
747-400
757-200
767-200
767-300
A-300
A-310
A-320
Washer 742687AVS-2 742687-2 Test and Computation per
14 CFR §21.303
Dwg: 742687AVS dated
9/13/00
-END OF LISTINGBoeing
737-200
NOTE: Minor design changes (reference 14 CFR part 21 §§ 21.93 and 21.95) must be submitted in a manner as
determined by the ACO. Major design changes (reference 14 CFR part 21 §§ 21.93 and 21.97) to drawings and
specifications are to be handled in the same manner as that for an original FAA-PMA.
Original Signed copy on File at MIDO
Ms. Lirio Liu Nelson, Manager
Seattle Aircraft Certification
Office, ANM-100S
Wolf R. Caliebe, Manager
Seattle Manufacturing Inspection
District Office, AMN-108S
Meggitt Silicone Products
Supplier Survey
Meggitt Silicone Products
2010 Lafayette Avenue
Post Office Box 887
McMinnville, Oregon 97128
USA
Tel: (503) 472-0045
Fax: (503) 434-6454
www.meggittsilicone.com
www.meggitt.com
ATTN: QUALITY DEPT.
RE: SUPPLIER QUALITY SURVEY
Please find attached our supplier quality survey form. In effort to meet our quality
system requirements, we need our vendors to complete the enclosed survey. This
will allow us to maintain you as a qualified source. We request you return the form
within 10 working days.
If you are an ISO certified company and have a third party registration, you may elect to record your
certification number on the audit cover sheet, send us a copy of the cert, and forego completing the rest of
the survey.
Thank you for your effort in this matter.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料17(7)