曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

64. Do written procedures exist for identifying, collecting, indexing, storing and disposing of
quality records? Yes No
65. Are records kept for a minimum of 7 years? Yes No
66. Are quality records stored in such a way to allow for retrieval in no longer than 48 hours?
Yes No
67. Does a written procedure exist for quality audits? Yes No
68. Are audits scheduled on the basis of importance of activity? Yes No
6 of 7
Self Evaluation Questionnaire
69. Are auditors trained and knowledgeable of the area of audit? Yes No
70. Are results of audits reviewed by members of management? Yes No
71. Is corrective action taken on findings found by the audit? Yes No
72. Do written procedures exist for identifying training needs for all activities affecting quality?
Yes No
73. Are records of training maintained? Yes No
74. Does the supplier currently employ S.P.C. to drive continuous process improvement?
Yes No
7 of 7
1
Recent Advances in Inspection & Health
Monitoring of Aerospace Materials &
Structures for General Aviation
Jay Amos (Cessna Aircraft)
NDE Materials & Processes Engineering
2
 Cessna is part of Textron, a multi-industry company with strong brands such as Bell Helicopter,
Kautex, Lycoming, AAI Corporation, E-Z-GO Jacobsen and Greenlee.
 Citation X
 Cessna's Citation X is the fastest business jet in the world (0.92 Mach), capable of flying from New
York to London in just under 6 hours.
 300th production Citation X rolled off the production line in 12/08; fleet has exceeded 1M flight hours
 Citation Sovereign
 Since the first delivery in late 2004, more than 250 Sovereigns have been delivered.
 Citation XLS+
 FAA certification was achieved in 5/08 (EASA in 3/09); first retail XLS+ delivered in 12/08
 With a global fleet of more than 700 and more than 1.4M flight hours (as of 8/08), the Excel/XLS is the
best-selling business jet model
 Citation CJ4
 CJ4 prototype completed first flight in 5/08; First flight of the production CJ4 in 8/08.
 Plan to begin customer deliveries in the first half of 2010.
 Mustang
 The first retail Citation Mustang entered service in April 2007, and Cessna delivered 45 in 2007
 About three of every five Mustangs go to international customers,
 Certified in 60 countries through April 2009; Fleet reached 100 in August 2008 and 200 in May 2009
Cessna Aircraft
 Corvalis and Corvalis TT
 The Corvalis TT received EASA certification February 2009
 Corvalis TT – the fastest fixed-gear single-engine piston aircraft on the market
 Acquired certain assets of the former Columbia Aircraft Manufacturing Co. in
December 2007
 Skycatcher
 The Skycatcher Achieves ASTM Compliance in 7/09 Clearing the Way for
Deliveries
 Skyhawk
 Cessna delivered the 40,000th Model 172 in 2008 - the most produced aircraft in
history
3
Cessna History
 Cessna Aircraft Company is the world's largest manufacturer of
general aviation airplanes in terms of units delivered. In 2008, Cessna
delivered 1,301 aircraft, including 467 Citation business jets.
 Leading designer and manufacturer of light and mid-size business jets
and utility turboprops, and a leading manufacturer of single-engine
piston aircraft
 Since the company was originally established in 1927, some 192,000
Cessna airplanes have been delivered around the world, flying in
nearly 80 countries
 including more than 24,000 twin-engine, 2,000 military jets and 6,000
Citations, making it the largest fleet of business jets in the world.
 Employment of 8019 as of 9/09.
 Most complete line of business jets in the industry - a Citation takes
off or lands somewhere in the world every 20 seconds.
 2009 approximate delivery rates (projected)
 400 single-engine pistons
 100 Caravans
 275 Citation business jets
4
Wichita - Mid-Continent
Headquarters and jet assembly, 3.5 million square feet
Wichita - Pawnee
Component production, 1.5 million square feet
Wichita Citation Service Center
477,000 square feet – one of the largest buildings in Kansas
Room for some 100 Citations for service, w/5,270 service orders in 2007
Independence, Kan.
SEP and Mustang assembly, Opened in 1996, 528,000 square feet
Columbus, Ga.
Component production, Opened in 1996, 241,500 square feet
Chihuahua, Mexico
Component Production, Opened in 2006, 206,000 square feet
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料38(113)