曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

assessment of the finding) prior to release
of the aeroplane to service should be
prescribed in the Air Operators’ Licences
or in the instructions for maintenance and
inspection of the aeroplane types.
A draft investigation report had been submitted to the
operator concerned and the JAR 145 organisation
charged with the maintenance of the aeroplane for
comments. As has been stated by the operator, the
maintenance organisation will retrofit the aeroplanes
concerned with the technically improved pitot tubes, and
also the internal procedures will be examined.
Investigator-in-charge K. Büttner
field investigation K. Büttner
Flight Data Recorder D. Ritschel
LK COORDINATE MEASURING MACHINES
BRIDGE
CMM
CAMIO CMM
SOFTWARE
HORIZONTAL
ARM CMM
RResouFrcesM For Manufacturing, Inc.
2
Now part of the Metris family of metrology solutions, LK CMMs are leading the way, blending
CMM expertise with new sensor technologies and providing new technologies for the market.
p. 3 METRIS’ LK FAMILY
p. 4 THE BRIDGE CMM RANGE
p. 5 LK ASCENTTM
p. 6 LK INTEGRATM
p. 7 LK EVOLUTIONTM
p. 8 LK LIBEROTM
p. 9 LK ULTIMATM
p. 10 HORIZONTAL ARM CMM RANGE
p. 11 LK LY90STM
p. 12 LK HC90TM
p. 13 CAMIOTM SOFTWARE
p. 14 CMM UPGRADES AND RETROFITS
p. 15 CUSTOMER SERVICE AND SUPPORT
p. 16 THE METRIS COMPANY
Reliable and Innovative Metrology Solutions
3
Metris’ LK CMM Family
CUSTOMER REFERENCES
ABB, Airbus, Boeing, BAE, Bosch, Bridgeport, Budd, Caterpillar, Cincinnati Milacron, Cummins,
DaimlerChrysler, Dunlop, Ford, GEC, General Electric, General Motors, Harley Davidson Motor
Co, Jaguar, JCB, John Deere, Land Rover, Lockheed, Lucas, Magna Group, Marconi, Mazda,
Messier-Dowty, Michelin, Perkins Plessey, Peugeot, Pratt & Whitney, Rolls-Royce,
Shanghai General Motors, Snecma, Toyota, Volvo, etc.
INTRODUCTION
Prior to the acquisition of LK by Metris in 2006, the company
was established over a 40 year period as a premium supplier
of Coordinate Measuring Machines (CMMs) to the global
automotive and aerospace sectors, as well as to numerous
engineering companies across a wide variety of industries.
From the early days, LK pioneered innovative technologies
in the metrology market and was credited with a long list of
new technology introductions, including the fi rst bridgestyle
Coordinate Measuring Machine, the fi rst high accuracy
horizontal spindle CMM and the fi rst software developed
specifi cally for CMMs.
Now part of the Metris family of metrology solutions, LK CMMs
are once again leading the way, blending CMM expertise with
new sensor technologies and providing new technologies to
the market.
MULTI-SENSOR FLEXIBILITY
LK CMMs are designed as multi-sensor platforms.
Touch Probe Non-Scanning applications are all fully supported
for basic point-to- point inspection requirements.
Digital Touch-Trigger Probe scanning is the cost-effective
alternative to analog probe scanning when scanning
functionality is required on an infrequent basis. Using unique
Metris controller algorithms, up to 10 points per second of data
can be collected with a standard probe.
Analog Probe Scanning is used in both unknown and
programmed known path mode, offering high speed and high
density data collection. Where feature form is a requirement,
analog scanning provides the ultimate data collection.
Laser Scanning is a well-established technology enabling
complete modeling and inspection of complex freeform, multifi
lleted or featured parts. Due to its non-contact nature, laser
scanning is also perfectly suited to measure fl exible or fragile
materials. Metris laser scanners are designed to operate on the
CMM using Camio Studio and through the Renishaw PH10M and
multi-wire, which results in plug and play integration without
additional wiring. LK CMMs are particularly suitable for laser
scanning due to their advanced controller technology.
4
SPECIFICATIONS Volumetric Accuracy Repeatability Velocity Acceleration
Ascent 2.3+L/300 U/3 2.5mm 31 m/min 4800 m/min2
Integra From 1.9+L/350 U/3 From 1.5mm From 40 m/min From 4800 m/min2
Evolution From 1.10+L/400 U/3 From 1.3mm From 46 m/min From 5100 m/min2
Libero From 0.7+L/600 U/3 From 0.5mm From 46 m/min From 5100 m/min2
Ultima From 3.5+L/300 U/3 From 3.5mm From 28 m/min From 1700 m/min2
LK DPEC (Dynamic Probe Error
Correction) - giving you the
highest accuracy available
The Bridge CMM Range
LK Ultima
LK Libero
LK Evolution
LK Integra
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料38(60)