曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

XXXNNN
XXX = 3 first letters of REF FIX ident.
NNN = value of the radial
[ 5L ] - [ 5R ] ABEAM This function enables the pilot to create waypoints on a flight plan (primary
or secondary) that are abeam a reference fix.
Once computed, the page displays the radial number in green large font.
Time, distance and altitude predictions are displayed in green small font.
Selecting the key adjacent to the star creates the waypoint and inserts it into
the flight plan.
The waypoint is identified by AB + the REF FIX ident e.g. AB TLS.
Abeam waypoints are not stored in the pilot stored waypoint database.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 25/116
FCOM 19 AUG 10
Note: Two FIX INFO pages are available, providing the capability to define two different REF FIX
elements.
AIRWAYS PAGE
Applicable to:
This page allows the pilot to select up to five airways for stringing into the flight plan after the revise
waypoint.
The pilot calls up this page by pressing the lateral revision page [ 5R ] key.
TITLE Revise point ident (large green font)
[ 1L ] VIA to [ 5L ] This field displays the airways entered by the pilot.
[ 6L ] ERASE or
RETURN
The flight crew presses this key to return to the lateral revision page. This
field displays ERASE when a temporary flight plan is created. It allows to
erase the temporary flight plan.
[ 1R ] TO to [ 5R ] Displays the ending points of the corresponding airways entered on the [ 1L ]
to [ 5L ] entries. The ending point is displayed in large blue font if manually
entered, in blue small font if FMGC computed.
[ 6R ] INSERT(amber) Allows to insert the entered VIA/TO segments into the flight plan. The
display reverts to the F-PLN page.
DEPARTURE PAGES
Applicable to:
These pages allow the pilot to review departure procedures (RWY, SID, TRANS) and enter them into
the active flight plan.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 26/116
FCOM 19 AUG 10
The pilot calls them up by pressing the 1L key when the display is showing the lateral revision page
for the origin.
Three pages are available : RWY, and SIDS and TRANS (if any).
The pilot calls up each page sequentially either by selecting a data item (such as RWY) or by
pressing the [ → ] key on the MCDU console.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 27/116
FCOM 19 AUG 10
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 28/116
FCOM 19 AUG 10
Line 1 RWY, SID
TRANS
This line displays the RWY, SID, and TRANS in green after they have been
inserted into the active flight plan or in yellow if selected but not yet inserted.
If nothing has been selected or inserted, the line displays dashes.
[ 2L ] RWY's/SID's to
[ 5L ]
These fields display selectable and selected RWYs or SIDs (including
EOSID and NO SID option). The pilot can slew each list. Selectable RWYs
and SIDs are displayed in blue with an arrow.
Once a RWY or SID is selected, the arrow disappears.
A RWY or SID already inserted in the flight plan is displayed in green.
The display shows the length, heading (T if true North referenced), and, if
available, the ILS ident and frequency for each runway.
[ 6L ] ERASE or
RETURN
The pilot presses this key to erase a selected data item and revert to the
previous selection.
If the pilot erases the page, the display reverts to the active flight plan page.
The display shows RETURN instead of ERASE when the pilot has not
created a temporary flight plan.
[ 2R ] TRANS to [ 5R ] This field displays the selectable and selected en route transitions
respectively in blue and green. They are blank if there are no transitions.
[ 6R ] INSERT or
BLANK
The pilot uses this key to insert a temporary procedure into the flight
plan. The page reverts to the active flight plan page when the insertion is
completed.
It is associated with RETURN (6L).
[ 6M ] EOSID Once a runway is inserted into the flight plan, this field displays any ENG
OUT SID for that runway. If there is none, it displays NONE.
HOLD PAGES
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A330/A340機組操作手冊 FLIGHT CREW OPERATING MANUAL FCOM 1(106)