曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

2 are filled with default values after entry of a runway in [ 1R ]. QNH or QFE and wind are
common with page 1.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 80/116
FCOM 19 AUG 10
UPLINK MAX TO DATA PAGES
Applicable to:
This page is accessed from the UPLINK TO DATA REQ page by pressing the RECEIVED TO DATA
key.
There is a set of 2 pages (MAX TO DATA and FLEX DRT TO DATA) for each of the 4 uplinked
runway data. Uplinked data is displayed in green, and cannot be modified by the pilot.
[ 1L ] TOW/TOCG Uplinked reference takeoff gross weight, and takeoff center of gravity.
[ 2L ] TEMP/QNH (or
QFE)
Uplinked temperature and baro setting.
[ 3L ] MAG (TRUE)
WIND
Uplinked takeoff runway wind. MAG or TRUE, depending on the runway
reference.
[ 4L ] CONTAM Uplinked takeoff runway contamination.
[ 5L ] THR RED/ACC Uplinked thrust reduction and acceleration altitudes.
[ 6L ] UPLINK TO DATA
V1, VR, V2
Pressing the key calls up the UPLINK TO DATA REQ page.
Uplinked takeoff speeds.
[ 1R ] SHIFT/RWY Uplinked TO runway ident, runway intersection, and position shift.
[ 2R ] TO LIMIT Uplinked runway length remaining.
[ 3R ] FLAPS/THS Uplinked FLAPS/SLATS CONF and TRIM position.
[ 4R ] FLEX TO Pressing the key calls up the UPLINK FLEX (or DRT, derated takeoff option
　 ) TO DATA pages.
[ 5R ] ENG OUT ACC Uplinked engine-out acceleration altitude.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 81/116
FCOM 19 AUG 10
[ 6R ] INSERT UPLINK* Uplinked takeoff data is available for insertion.
Selecting this prompt inserts the following data in the FM :
V1, VR, V2‐
THR RED/ACC, ENG OUT ACC altitudes‐
MAG WIND‐
FLAPS/THS‐
SHIFT‐
FLEX or DRT‐
The display reverts to the PERF TO page ; the asterisk disappears.
This field is not displayed, if the runway does not match the active runway, or if the uplinked
TOW/TOCG differs from the current TOW/TOCG (if already existing). The “CHECK TAKEOFF
DATA” message is displayed on the MCDU scratchpad.
Note: All previously-received data is replaced by the new uplinked data.
UPLINK FLX (OR DRT) TO DATA PAGES
Applicable to:
TITLE UPLINK FLX TO DATA or UPLINK DRT TO DATA, if the derated takeoff
function is installed, and if the pilot selected a derated takeoff.
[ 2L ] FLX (or DRT)/QNH (or QFE)
When the UPLINK FLEX TO DATA page is selected, it displays uplink
assumed Flex Temperature and baro setting (QNH or QFE).
When the UPLINK DRT TO DATA page is selected, this field displays
DRT/BARO. If so, it displays the thrust rating and baro setting (QNH or
QFE).
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 82/116
FCOM 19 AUG 10
[ 4R ] MAX TO Pressing this key calls up the MAX TO DATA page.
For all other fields, refer to MAX TO DATA page.
ACARS FUNCTIONS PAGE 2
Applicable to:
Line 1 F-PLN RPT
SEND
This key, when pressed, sends the flight plan report to the ground.
Line 2 POSITION RPT
SEND
This key, when pressed, sends a Position Report to the ground.
Note: No report can be sent if “SEND” is not followed by a star‐
When a function (line 1 or 2) is deactivated through the navigation database policy file,‐
the corresponding line is blank.
[ 6L ] RETURN The pilot presses this key to make the display revert to the DATA INDEX
page.
[ 6R ] PRINT
FUNCTION
The pilot presses this key to access the PRINT FUNCTION page.
PERF PAGES
Applicable to:
The flight plan is divided into several phases :
PREFLIGHT - TAKEOFF - CLIMB - CRUISE - DESCENT - APPROACH - GO-AROUND - DONE
Each phase except the preflight and done phases has a performance (PERF) page. The PERF
pages display performance data, speeds related to the various phases, and predictions.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 83/116
FCOM 19 AUG 10
Pressing the PERF key on the MCDU console calls up the performance page for the current active
phase. Performance pages relating to phases already flown are not available.
In the preflight and done phases, pressing the PERF key brings up the takeoff performance page.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A330/A340機組操作手冊 FLIGHT CREW OPERATING MANUAL FCOM 1(121)