-------------------------------------------------------------------------------
| NOSE-LANDING-GEAR DOOR AND UPLOCKS | -------------------------------------------------------------------------------| Item| Specified Components | Greasers | Quantity of Lubrication Greasers | | No. | to be Lubricated | Total QTY| at each Position | |-----|----------------------|----------|-------------------------------------| | 1 | NLG Door Uplock | 4 | 3 on the aft side | | | | | 1 on the forward side | |-----|----------------------|----------|-------------------------------------| | 2 | NLG Gear Uplock | 3 | 2 on one side | | | | | 1 on the other side | |-----|----------------------|----------|-------------------------------------| | 3 | Rotating Rod | 4 | 1 on the lower attachment pin | | | Assembly | | 3 on the rotating rod | |-----|----------------------|----------|-------------------------------------| | 4 | NLG Door Actuating | 2 | 1 on support bracket attachment pin| | | Cylinder | | 1 on bellcrank lever attachment pin| -------------------------------------------------------------------------------
(3) Remove the unwanted grease:
(a)
Clean the greasers with a clean MISCELLANEOUS (Material No. 19-003) and CLEANING AGENTS (Material No. 11-026).
(b)
Make sure that the greaser ball has seated correctly.
**ON A/C ALL
5. Close-up
________
Subtask 12-22-32-410-051
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
(3)
Close the NLG doors (Ref. TASK 32-22-00-410-001).
1EFF : ALL 1 12-22-32Page 370 1 1 Aug 01/05R 1 1 1CES 1
Subtask 12-22-32-942-052
B. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
DOORS - SERVICING
_________________
TASK 12-22-52-640-002
Lubrication of the FWD and AFT Cargo-Compartment Doors
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK AREA WHEN
_______ YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
1. Reason for the Job
__________________
Refer to the MPD TASK: 523000-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific adjustable access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
No specific cloth
Material No. 03-001 USA MIL-PRF-7870
MINERAL OIL (LOW TEMP) (Ref. 20-31-00)
Material No. 04-004 USA MIL-PRF-23827 TYPE I
SYNTH.ESTER BASED GREASE HIGH PRESSURE
(Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump
52-31-13-000-001 Removal of the Lining and the Insulation
52-31-13-400-001 Installation of the Lining and the Insulation
52-32-13-000-001 Removal of the Lining and Insulation
52-32-13-400-001 Installation of the Lining and Insulation
R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
12-22-52-991-002-A Fig. 301
**ON A/C 051-052,
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM SERVICING 2(23)
