曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  (b) Moderate contamination: 
R  1_  The contamination is moderate if the sample contents has
R  between 1000 and 5000 RLU/litre. 
R  2_  Use the same method and do the sample test again in not more
R  than 10 days after the first test. 
R  3_  If the contamination has not changed from moderate:
R  - do the BIOBOR biocidal shock treatment (moderate 
R  contamination procedure) to all fuel tanks (Ref. TASK 28-11-
R  00-600-008) or (Ref. TASK 28-11-00-600-008) 
R  or 
R  - do the KATHON biocidal shock treatment (moderate 
R  contamination procedure) to all fuel tanks (Ref. TASK 28-11-
R  00-600-008) or (Ref. TASK 28-11-00-600-008). 
R  (c) Heavy contamination 
R  1_  The contamination is heavy if the sample contents has more
R  than 5000 RLU/litre. 
R  2_  Use the same method and do the sample test again in not more
R  than 10 days after the first test. 
R  3_  If the contamination has not changed from heavy:
R  - do the BIOBOR biocidal shock treatment (heavy contamination 
R  procedure) to all fuel tanks (Ref. TASK 28-11-00-600-009) or 
R  (Ref. TASK 28-11-00-600-009) 
R  or 
R  - do the KATHON biocidal shock treatment (heavy contamination 
R  procedure) to all fuel tanks (Ref. TASK 28-11-00-600-009) or 
R  (Ref. TASK 28-11-00-600-009). 
R  NOTE : When you do the heavy contamination procedure, you will____ 
R  need to enter all the fuel tanks to remove the 
R  contamination (Ref. TASK 28-11-00-600-003).

 5. Close-up
________

 Subtask 12-32-28-410-054
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the applicable access panels:

 -for water drain valve 94QM, close 195BB
 -for water drain valve 95QM, close 196BB.
 Subtask 12-32-28-942-054

 B. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the ground support and maintenance equipment, the special and

 standard tools and all other items. R

 HYDRAULIC FLUID - SERVICING
___________________________
 TASK 12-32-29-281-001 Hydraulic Fluid Sample of Green,Blue and Yellow Systems for Analysis WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
 CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.

 WARNING : MAKE SURE THAT THE CONTROLS AGREE WITH THE POSITION OF THE ITEMS THEY
_______
 OPERATE BEFORE YOU PRESSURIZE A HYDRAULIC SYSTEM.

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS
_______
 ONLY WITH A GOOD SUPPLY OF AIR.
 OBEY THE MANUFACTURERS INSTRUCTIONS.
 PUT ON PROTECTIVE CLOTHING.
 DO NOT GET THEM IN YOUR MOUTH.
 DO NOT SMOKE.
 DO NOT BREATHE THE GAS.
 THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
 GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.

 WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______ R WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______ R - FLUSH IT AWAY WITH CLEAN WATER R - GET MEDICAL AID.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 291000-15

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific lint-free cloth
 No specific warning notices
 No specific glass sample bottle 0.25 l (0.0660 USgal)
 No specific container 1.0 l (0.2641 USgal)
 HSPA181-380J 2 HYDRAULIC PURIFIER

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
No specific corrosion-resistant steel lockwire 0.8 mm (0.032 in.) dia. R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM SERVICING 2(77)