(c)
Auto-print of flight reports: This option determines whether or not the auto-printing of the pre-flight, in-flight and post-flight reports is allowed. This option, if enabled, defaults to the auto-print trigger states selected by the following parameters and can be manually overridden via the PRINT FUNCTION page. If not enabled, printing of these reports is inhibited and cannot be manually overridden.
-
Auto-print at engine start: This is the default value selected for auto-printing of the pre-flight report if the auto-print of flight reports is selected. If the auto-print of flight reports is not selected, the pre-flight report cannot be automatically printed and this value is ignored.
-
Auto-print at engine shutdown: This is the default value selected for auto-printing of the post-flight report if the auto-print of flight reports is selected. If the auto-print of flight reports is not selected, the post-flight report cannot be automatically printed and this value is ignored.
-
Auto-print at transition to takeoff This is the default value selected for auto-printing of the in-flight report if the auto-print of flight reports is selected. If the auto-print of flight reports is not selected, the in-flight report cannot be automatically printed and this value is ignored.
1_ Auto-print of flight plan uplink:
This is the default value selected for auto-printing of the
flight plan initialization uplink message if the auto-print of
ACARS uplinks is selected. If the auto-print of ACARS uplinks
is not selected, the uplink message cannot be automatically
printed and this value is ignored.
2_ Auto-print of takeoff data uplink:
This is the default value selected for auto-printing of the
takeoff data uplink message if the auto-print of ACARS uplinks
is selected. If the auto-print of ACARS uplinks is not
selected, the uplink message cannot be automatically printed
and this value is ignored.
3_ Auto-print of wind uplink:
This is the default value selected for auto-printing of the
wind uplink message if the auto-print of ACARS uplinks is
selected. If the auto-print of ACARS uplinks is not selected,
the uplink message cannot be automatically printed and this
value is ignored.
(2) MCDU mechanization A prompt ACARS/PRINT FUNCTION is displayed on the DATA INDEX page and allows access to the ACARS FUNCTION and the PRINT FUNCTION pages. (Ref. Fig. 012) The ACARS FUNCTION page displays the activated ACARS functions. The activation state of the ACARS functions is dependent on the options selected within the Nav data base policy file and is not pilot modifiable. The ACARS FUNCTION page also allows a user to perform requests for flight plan initialization data, takeoff data and wind data and to manually send flight reports to the ground via the ACARS (if the corresponding function is activated). The PRINT FUNCTION page displays the selection state of the automatic printing function for the ACARS and flight report functions. This state is dependent on the selected options in the Nav data base policy file and may be modified by the pilot. The PRINT FUNCTION page also allows the manual printing of the flight reports and of the current FM flight plan initialization data, takeoff data and wind data.
(a) PRINT FUNCTION page (Ref. Fig. 013, 014) This page displays the print functions enabled and disabled for the FM ACARS/PRINT functions, allows selection of whether or not an automatic report of an ACARS uplink message is printed upon reception, allows selection of whether or not an automatic flight report is printed upon triggering the report and allows manual printing of flight plan initialization, takeoff data, wind data and flight reports.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM AUTO FLIGHT 自動飛行4(63)
