曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 **ON A/C 159-199, 210-210,
 (1) Engine Mechanical Advisory Report Data Field Description <07> (Engine Type CFMI with Advanced EVMU)
 NOTE : Only the parts of the ENGINE MECHANICAL ADVISORY REPORT <07>
____ which are not included in the ENGINE CRUISE REPORT <01> are given in the subsequent table.
R 1EFF : 106-149, 159-199, 210-299, 301-399, 1 31-37-73Page A53 1401-499, 1Aug 01/05 1 1 1CES 1R +---------------------------------------------------------------------+ R | Value | Content Description | R |--------------|------------------------------------------------------| R | E | Exeedance Engine Position | R | 9 | DMU (No. of engine where the exceedance occurs. | R | | If the report was not triggered by a limit | R | | exceedance then this field has zero's. | R |--------------|------------------------------------------------------| R | MAX | Maximal Value of the Exceeded Parameter | R | 9999 | If there is OIPL1.1 or OIPL1.2 exceedance the | R | | minimal value is printed. If the report was not | R | | triggered by a limit exceedance then this field | R | | has zero's. | R |--------------|------------------------------------------------------| R | LIM | Programmable Limit, which was exceeded | R | 9999 | | R | | If the report was not triggered by a limit | R | | exceedance then this field has zero's. | R |--------------|------------------------------------------------------| R | REF | N2 at Stall Detection | R | 9999 | ECU (0.0 to 120.0% rpm) | R | | N1 7C.1.346.01 Engine 1 | R | | 7C.2.346.10 Engine 2 | R | | | R | | N2 7C.1.346.01 Engine 1 | R | | 7C.2.346.10 Engine 2 | R |--------------|------------------------------------------------------| R | TOL | Time Over Limit | R | 999 | DMU (Time at least 60 seconds) | R | | If the report was not triggered by a limit | R | | exceedance then this field has zero's. | R |--------------|------------------------------------------------------| R | TTP | Time To Peak | R | 999 | | R | | If the report was not triggered by a limit | R | | exceedance then this field has zero's. | R |--------------|------------------------------------------------------| R | REASON | Reason for Exceedance | R | XXXXXXXXXX | | R | XXXXXXXXXX | Up to 20 Characters | R | | OIT Code: 4110, 4120 and 4130 | R | | OIP Code: 4210, 4220 and 4230 | R | | VB1 Code: 4310 | R | | VB2 Code: 4320 | R | | If the report was not triggered by a limit | R | | exceedance then this field has zero's. | R +---------------------------------------------------------------------+

R 1EFF : 159-199, 210-210, 1 31-37-73Page A54 1 1 May 01/05 1 1 1CES 1

 

R **ON A/C 001-049, 051-099, 101-105, 151-158, 201-209,

 (2) Engine Mechanical Advisory Report Logic <07> (Engine Type CFMI with Advanced EVMU)
 +----------------------------------------------------------------------+ |Code|Item | |Progr.|Standard | | No.|No. | Description of Function Item |MCDU |Value or | | | | |GSE |Table TXY| |----|------|-----------------------------------------|------|---------| | |A | Report Format | | | | |B | Parameter Table | | | | |C | First three lines of Report | C | Blank | | |D | Print Out Rules | C | 2 | | |E | Transfer to ACARS MU | C | No | | |F | Increment of the report counter if the | C | 1 | | | | report was triggered by a code number | | | | | | > 1000; 1=yes, 0=no | | | | |G | 'Y07.1' Pre-event print intervals in | C | 4 | | | | seconds. | | | | |H | 'Y07.2' Post-event print intervals in | C | 5 | | | | seconds. | | | |----|------|-----------------------------------------|------|---------| |1000|1 | Manual selection via MCDU | | | |----|------|-----------------------------------------|------|---------| |2000|2 | Flight phase dependent manual | | | | | | selection via remote print button | | | | | | if programmed. | | | | |2.1 | Remote Print Button assignment. | C | not | |----|------|-----------------------------------------|------|---------| |3000|3 | Programmable Start Logic | | | | |3.1 | Trigger condition | C | not | |----|------|-----------------------------------------|------|---------| |4110|4 | OIT > OITL1 in all PH | | | |4120| | OIT > OITL2 in all PH | | | |4130| | OIT > OITL3 for 'Y07.3' min. in all PH | | | |4210| | OIP < OIPL1.1 at N2L2.1 in PH 2, 3 and 9| | | |4220| | OIP < OIPL1.2 at N2L2.2 in PH 4 to 8 | | | |4230| | OIP > OIPL2 in all PH | | | |4310| | VB1 is above Advisory Level in all PH | | | | | | Eng.1 param. 3D.1.035.01.11 | | | | | | Eng.2 param. 3D.1.035.10.11 | | | |4320| | VB2 is above Advisory Level in all PH | | | | | | Eng.1 param. 3D.1.035.01.12 | | | | | | Eng.2 param. 3D.1.035.10.12 | | | | | | | | |
R 1EFF : 001-049, 051-099, 101-105, 151-158, 1 31-37-73Page A55 1201-209, 1May 01/05 1 1 1CES 1 +----------------------------------------------------------------------+ |Code|Item | |Progr.|Standard | | No.|No. | Description of Function Item |MCDU |Value or | | | | |GSE |Table TXY| |----|------|-----------------------------------------|------|---------| | |4.1.1 | OITL1 limit in C (yellow limit) | C | T22/T23 | | |4.1.2 | OITL2 limit in C (red limit) | C | T22/T23 | | |4.1.3 | OITL3 limit in C | C | T22/T23 | | |4.1.4 | 'Y07.3' time limit in minutes | C | T22/T23 | | | | | | | | |4.2.1 | OIPL1.1 limit defined in the following | AI | T22/T23 | | | | table: | | | | | | OIPL1.1 (psia) | N2L2.1 (%rpm) | | | | | | ________________|_______________ | | | | | | 0 | 0 | | | | | | 0 | 54 | | | | | | 13 | 55 | | | | | | 13 | 65 | | | | | | 38 | 105 | | | | | | | | | | |4.2.2 | OIPL1.2 limit defined in the following | AI | T22/T23 | | | | table: | | | | | | OIPL1.2 (psia) | N2L2.2 (%rpm) | | | | | | ________________|_______________ | | | | | | 0 | 0 | | | | | | 0 | 54 | | | | | | 13 | 55 | | | | | | 13 | 65 | | | | | | 38 | 105 | | | | | | | | | | |4.2.3 | OIPL2 limit in psi | C | T22/T23 | | | | | | | |----|------|-----------------------------------------|------|---------| | |5 | Generation stops when exceedance param. | | | | | | are again within their limits or 10 sets| | | | | | of post event data are generated. | | | |----|------|-----------------------------------------|------|---------| |8100|8.1 | ACARS MU uplink request with IMI 'REQ07'| | | | | | The report <07> is immediately generated| | | | | | and transmitted to the ACARS MU. | | | |----------------------------------------------------------------------| | AI = Programmable by Airbus Industrie | | C = Programmable by Customer | +----------------------------------------------------------------------+
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 5(49)