WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific blanking plugs
 No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific thin-nose pliers
 No specific warning notice
 No specific warning notices
 No specific adjustable access platforms 2 m (6 ft. 7 in.) R CFD1142-00-000 1 R CFD1142-10-000 1 R CFD1142-20-000 1 R CFD1142-40-000 1
 460005835 1 GROUND LOCK SLEEVE
 98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
 98D32104002000 1 EQUIPMENT - MLG R/I
 98D32104002001 1 EQUIPMENT - MLG R/I
 98D32104002002 1 EQUIPMENT - MLG R/I
 1EFF : ALL 1 32-11-11Page 401 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
98D32104002003 1 EQUIPMT R/I MLG
 98D32104005000 1 SPANNER-MLG REAR PINTLE
 98D32104010000 1 INTERFACE BRACKET
 98D32104010001 1 BRACKET ASSY I/FACE
 98D32104080000 1 SPANNER - MLG REAR PIN
 98D32104190001 1 TOOL - R/I (MLG FWD AND REAR PINTLE PINS)
 98D32104190002 1 TOOL - R/I (MLG FWD AND REAR PINTLE PINS)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
 from the External Power 27-50-00-866-008 Extension of the Flaps on the Ground 27-54-45-000-004 Removal of the Torque Shaft 6208CM(6258CM) 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-23-00-860-001 Disconnection of the Isolation Coupling of the Power
 Transfer Unit (PTU) 32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-00-00-860-001 Flight Configuration Precautions with Electrical
 Power 32-11-16-000-001 Removal of the MLG Side-Stay Assembly 2505GM, 2506GM 32-12-00-010-001 Open the Main Gear Doors for Access 32-12-13-000-001 Removal of the Secondary Hinged Fairing 32-12-14-000-001 Removal of the MLG Fixed Fairing Assembly 32-31-46-000-001 Removal of the MLG Actuating Cylinder 32-41-11-000-006 Removal of the MLG Wheel
 (2649GM,2650GM,2651GM,2652GM) 32-42-27-000-001 Removal of the Brake (2641GM,2642GM,2643GM,2644GM) 32-11-11-991-006 Fig. 401
R **ON A/C 001-049, 051-061, 101-105, 201-203,
 32-11-11-991-027 Fig. 402
 1EFF : ALL 1 32-11-11Page 402 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 301-399,
 32-11-11-991-027-B Fig. 402A
R  **ON A/C 001-049, 062-099, 101-149, 151-199, 201-299, 401-499, Post SB 32-1213 For A/C 001-049,101-105,201-203, 32-11-11-991-027-A Fig. 402B **ON A/C ALL
 32-11-11-991-023 Fig. 403
 32-11-11-991-013-A Fig. 404
 32-11-11-991-014 Fig. 405

 **ON A/C ALL
 Post SB 32-1213 For A/C 001-049,101-105,201-203,
 32-11-11-991-008 Fig. 406
 **ON A/C ALL

 3. Job Set-up
__________
 Subtask 32-11-11-941-050

 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Make sure that the safety devices are installed on the landing gear (Ref. TASK 32-00-00-481-001).

 (3)
 On the panel 400VU:

 -make sure that the landing-gear control lever 6GA is in the DOWN position
 -put the warning notice in position to tell persons not to operate the landing-gear.
 1EFF : ALL 1 32-11-11Page 403 1 1 Aug 01/05 1 1 1CES 1

 (4)
 On the panel 110VU:

 -put the warning notice on the GRAVITY GEAR EXTN handle to tell persons not to operate the landing-gear doors.

 (5)
 Put the warning notices in the cockpit to tell persons not to operate the brakes.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架1(117)