5. Close-up
________ Subtask 32-11-11-942-061
A. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R 1EFF : ALL 1 32-11-11Page 492 1 1 Aug 01/05 1 1 1CES 1 TASK 32-11-11-920-001
Restoration of Main Gear
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
1. Reason for the Job
__________________
Refer to the MPD TASK: 321111-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears 32-11-11-000-001 Removal of the MLG Leg Assembly 32-11-11-400-001 Installation of the MLG Leg Assembly 32-11-16-000-001 Removal of the MLG Side-Stay Assembly 2505GM, 2506GM 32-11-16-400-001 Installation of the MLG Side-Stay Assembly 2505GM,
2506GM 32-41-11-000-006 Removal of the MLG Wheel (2649GM,2650GM,2651GM,2652GM)
1EFF : ALL 1 32-11-11Page 493 1 1 May 01/04 1 1 1CES 1 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
32-41-11-400-006 Installation of the MLG Wheel
(2649GM,2650GM,2651GM,2652GM) 32-42-27-000-001 Removal of the Brake (2641GM,2642GM,2643GM,2644GM) 32-42-27-400-001 Installation of the Brake
(2641GM,2642GM,2643GM,2644GM)
CMM 32-11-25 (for corrective action)
CMM 32-11-33 (for corrective action)
R CMM 32-12-13 (for corrective action)
R CMM 32-12-22 (for corrective action) CMM 32-12-25 (for corrective action) CMM 32-12-26 (for corrective action)
3. Job Set-up
__________
Subtask 32-11-11-941-052
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are installed on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing-gear control-lever 6GA is in the DOWN position
-put the warning notice in position to tell persons not to operate the landing gear.
(4)
On the panel 110VU:
-put the warning notice on the GRAVITY GEAR EXTN handle to tell persons not to operate the landing gear doors.
Subtask 32-11-11-010-055
B. Get Access
(1)
Remove the applicable MLG wheels (Ref. TASK 32-41-11-000-006).
(2)
Remove the applicable MLG brakes (Ref. TASK 32-42-27-000-001).
(3)
Remove the applicable MLG side-stay assembly (Ref. TASK 32-11-16-000-001).
1EFF : ALL 1 32-11-11Page 494 1 1 May 01/04 1 1 1CES 1
(4) Remove the applicable MLG leg assembly (Ref. TASK 32-11-11-000-001).
4. Procedure
_________
**ON A/C 001-003, 051-052,
Subtask 32-11-11-600-050-A
A. Restoration of Main Gear
(1)
Refer to the MLG leg assembly Component Maintenance Manual (Ref. CMM 32-11-33) to put the MLG leg assembly back to a serviceable condition.
(2)
Refer to the MLG side-stay assembly Component Maintenance Manual (Ref. CMM 32-11-25) to put the MLG side-stay assembly back to a serviceable condition.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架1(143)
