4. Procedure
_________
**ON A/C 001-049, 051-061, 101-103, 201-203,
(Ref. Fig. 401/TASK 52-42-22-991-001) R **ON A/C 062-099, 104-149, 151-199, 204-299, 301-399, 401-499,
(Ref. Fig. 401A/TASK 52-42-22-991-001-A)
**ON A/C 001-049, 051-061, 101-103, 201-203,
Subtask 52-42-22-020-050
A. Removal of the Ground Service Panel Door of the Green Hydraulic System
(1)
Hold the access door (2) and remove the nuts (16), the washers (17) and the screws (1).
(2)
Disconnect the bonding strap (15).
(3)
Remove the access door (2).
(4)
If it is necessary to remove the hinges (18) and (19), do the subsequent steps:
(a)
Remove the retaining ring (14) and the pin (3).
(b)
Remove the retaining rings (5) and the pins (4).
(c)
Remove the hinges (18) and (19).
(5)
If it is necessary to remove the spring bolt assembly, do the subsequent steps:
(a)
Remove the retaining ring (14) and the pin (3).
(b)
Remove the retaining ring (9) and the pin (8).
(c)
Remove the spring bolt (13) with the compression spring (12).
1EFF : ALL 1 52-42-22Page 405 1 1 Aug 01/05 1 1 1CES 1
(d) Remove the guide (10) and the washers (11). R **ON A/C 062-099, 104-149, 151-199, 204-299, 301-399, 401-499,
Subtask 52-42-22-020-050-A
A. Removal of the Ground-Service Panel-Door of the Green Hydraulic System
(1)
Remove the nut (8), the washer (7) and the bolt (1) and disconnect the bonding strap (6) from the upper hinge (3).
(2)
Hold the access door (2), remove the nuts (11), the washers (10) and the bolts (9) and disconnect the access door (2) from the hinges (3).
(3)
If necessary, remove the screws (5) and the washers (4) and disassemble the hinge (3) from the ground service panel.
1EFF : ALL 1 52-42-22Page 406 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
TASK 52-42-22-400-001
Installation of the Ground Service Panel Door of the Green Hydraulic System (197CB)
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 2.0 m (6 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
20-28-00-912-004 Electrical Bonding of Components With Conductive Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-
53-35-13-000-002 Removal of the Quick-Release Access Panels from the Belly Fairing Structure 53-35-13-400-002 Installation of the Quick-Release Access Panels on the Belly Fairing Structure
R **ON A/C 001-049, 051-061, 101-103, 201-203,
52-42-22-991-001 Fig. 401
1EFF : ALL 1 52-42-22Page 407 1 1 May 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 062-099, 104-149, 151-199, 204-299, 301-399, 401-499,
52-42-22-991-001-A Fig. 401A
**ON A/C 001-049, 051-061, 101-103, 201-203,
52-42-22-991-002 Fig. 402 R **ON A/C 062-099, 104-149, 151-199, 204-299, 401-499,
52-42-22-991-002-A Fig. 402A
**ON A/C 301-399,
52-42-22-991-002-B Fig. 402B
**ON A/C ALL
3. Job Set-up
__________
Subtask 52-42-22-941-050
A. Make sure that the access platform is in position below the ground service panel door of the Green hydraulic system.
4. Procedure
_________
**ON A/C 001-049, 051-061, 101-103, 201-203,
(Ref. Fig. 401/TASK 52-42-22-991-001) R **ON A/C 062-099, 104-149, 151-199, 204-299, 301-399, 401-499, 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門7(13)
