(2)
Install the springs (3) and the screws (2).
1EFF : ALL 1 52-42-11Page 404 1 1 Feb 01/98 1 1 1CES 1
5. Close-up
________ Subtask 52-42-11-410-051
A. Visual Inspection
(1) Make sure that the work area is clean and clear of tool(s) and other items.
Subtask 52-42-11-410-050
B. Close Access
(1) Close the service door 172AR. Subtask 52-42-11-942-051
C. Remove Ground Equipment
(1) Remove the access platform(s).
1EFF : ALL 1 52-42-11Page 405 1 1 Feb 01/98 1 1 1CES 1
DOOR - EXTERNAL POWER RECEPTACLE - REMOVAL/INSTALLATION
_______________________________________________________ TASK 52-42-12-000-001 Removal of the External-Power Receptacle Door (121AL)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.80 m (5 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-42-12-991-001 Fig. 401
3. Job Set-up
__________ Subtask 52-42-12-010-050
A. Get Access
(1)
Put an access platform in position at zone 121.
(2)
Open the door 121AL.
1EFF : ALL 1 52-42-12Page 401 1 1 Feb 01/98 1 1 1CES 1
4. Procedure
_________ Subtask 52-42-12-020-050
A. Removal of the External-Power Receptacle Door (Ref. Fig. 401/TASK 52-42-12-991-001)
(1)
Remove the cotter pin (3) and discard it.
(2)
Hold the spring (14).
(3)
Remove the nut (4) and the washer (2).
(4)
Remove the screw (10) and the plate (8).
(5)
Let the spring (14) hang free.
(6)
Remove the bolt (6) and the washer (7).
(7)
Move the bonding lead (5).
(8)
Remove the sealant from the door hinge (12).
(9)
Hold the door (9).
(10)
Remove the three bolts (13).
(11)
Remove the door (9).
1EFF : ALL 1 52-42-12Page 402 1 1 Feb 01/98 1 1 1CES 1
External-Power Receptacle Door
Figure 401/TASK 52-42-12-991-001
1EFF : ALL 1 52-42-12 Page 403
1 1 Feb 01/98
1 1
1CES 1
TASK 52-42-12-400-001
Installation of the External-Power Receptacle Door (121AL)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 09-019 USA AMS 3267/3
LOW ADHESION CORROSION INHIBITING SEALANT
(Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
Rcotter pin 52-42-12 01A-100
1EFF : ALL 1 52-42-12Page 404 1 1 Nov 01/00 1 1 1CES 1 D. Referenced Information
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM DOORS 艙門7(3)
