(a)
Remove the access panel 198BB as necessary (Ref. TASK 53-35-13-000-002).
(b)
Loosen the screws (31).
(c)
Adjust the latch hook (30) until you get the correct values.
(d)
Tighten the screws (31).
(4)
Make sure that it is possible to open and close the access door (1) correctly.
(5)
Make sure that the latch assembly is correctly locked and that the access door (1) makes a continues surface with the skin of the aircraft.
**ON A/C 301-399,
Subtask 52-42-23-820-050-A
B. Adjustment of the Ground Service Panel Door of the Yellow Hydraulic System
(1)
Carefully close and lock the access door (1).
(2)
Make sure that the values of the permitted contour offset and the gap between the access door (1) and the panel 198KB are in the limits. (Ref. Fig. 402B/TASK 52-42-23-991-002-B)
(3)
If it is necessary to adjust the access door (1):
(a)
Remove the access panel 198KB as necessary (Ref. TASK 53-35-13-000-002).
(b)
Loosen the screws (31).
(c)
Adjust the latch hook (30) until you get the correct values.
(d)
Tighten the screws (31).
1EFF : ALL 1 52-42-23Page 413 1 1 Aug 01/05 1 1 1CES 1R Adjustment of the Ground Service Panel Door of the Yellow Hydraulic System R Figure 402B/TASK 52-42-23-991-002-B
1EFF : 301-399, 1 52-42-23Page 414 1 1 May 01/04 1 1 1CES 1
(4)
Make sure that it is possible to open and close the access door (1) correctly.
(5)
Make sure that the latch assembly is correctly locked and that the access door (1) makes a continues surface with the skin of the aircraft.
**ON A/C ALL
5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 52-42-23-410-050
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
If removed, install the access panel 198BB (Ref. TASK 53-35-13-400-002).
(3) Remove the access platform(s).
**ON A/C 301-399,
Subtask 52-42-23-410-050-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
If removed, install the access panel 198KB (Ref. TASK 53-35-13-400-002).
(3)
Remove the access platform(s).
1EFF : ALL 1 52-42-23Page 415 1 1 Aug 01/05 1 1 1CES 1 DOOR - BLUE HYDRAULIC SYSTEM GROUND SERVICE PANEL - REMOVAL/INSTALLATION
________________________________________________________________________
TASK 52-42-25-000-001
Removal of the Ground Service Panel Door of the Blue Hydraulic System (197EB)
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 2.0 m (6 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
53-35-13-000-002 Removal of the Quick-Release Access Panels from the Belly Fairing Structure
**ON A/C 001-049, 051-061, 101-103, 201-203,
52-42-25-991-001 Fig. 401 R **ON A/C 062-099, 104-149, 151-199, 204-299, 301-399, 401-499,
52-42-25-991-001-A Fig. 401A
1EFF : ALL 1 52-42-25Page 401 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
3. Job Set-up
__________
**ON A/C 001-049, 051-061, 101-103, 201-203,
(Ref. Fig. 401/TASK 52-42-25-991-001) R **ON A/C 062-099, 104-149, 151-199, 204-299, 301-399, 401-499,
(Ref. Fig. 401A/TASK 52-42-25-991-001-A)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門7(18)
