曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (a) For the left pylon: 414FR, 471AL, 472AR.
 (b) For the right pylon: 423FL, 481AL, 482AR.
 Subtask 54-51-00-040-058
 C. Aircraft Maintenance Configuration
 (1) Make the thrust reverser unserviceable (Ref. TASK 78-30-00-481-041).
 Subtask 54-51-00-110-058
 D. Cleaning of the Structure
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R R R  (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
 4. Procedure_________
 Subtask 54-51-00-220-058
 A. Inspection (Ref. Fig. 609/TASK 54-51-00-991-006) 
R R  (1) Do a detailed inspection of the internal and external structure of the pylon-to-wing attach-fitting lugs.
 (2) Make sure that there is no:
R R R  (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200-P.Block001) for types of corrosion, inspection, removal and corrosion protection.
R R R  (b) Other damage (cracks, scratches, stress, marks dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100-P.Block001) for damage classification and associated corrective action.

 

 Outer and Inner Fittings at RIB4 Figure 609/TASK 54-51-00-991-006 
R 1EFF : 1 1 1CES  ALL  1 111 54-51-00 Page 646 May 01/00

 5. Close-up
________

 Subtask 54-51-00-440-058
 A. Aircraft Maintenance Configuration
 (1) Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041). Subtask 54-51-00-410-057
 B. Close Access
 (1)
 Install the panels.

 (a)
 For the left pylon: 414FR, 471AL, 472AR.

 (b)
 For the right pylon: 423FL, 481AL, 482AR.

 

 (2)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (3)
 Remove the access platform(s).

 (4)
 Remove the warning notice(s).

R 1EFF : ALL 1 54-51-00Page 647 1 1 May 01/00 1 1 1CES 1

 TASK 54-51-00-200-007

R  Special Detailed Inspection of Pylon-to-Wing Forward Attachment Shackles at RIB4
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 545115-02
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
 No specific access platform 1.5 m (4 ft. 11 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 Material No. 19-003  USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

R 1EFF : ALL 1 54-51-00Page 648 1 1 May 01/00 1 1 1CES 1

 C. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
36-11-48-000-004 Removal of the Bleed Air Ducts 36-11-48-400-004 Installation of the Bleed Air Ducts NTM 545115,P.Block-401 SRM 511100,P.Block 001 (for corrective action) SRM 512200,P.Block 001 (for corrective action) 54-51-00-991-055 Fig. 610 54-51-00-991-059 Fig. 611
 3. Job Set-up
__________ Subtask 54-51-00-941-058
 A. Safety Precautions
 (1)
 On the center pedestal, on the ENG panel 115VU:

 (a) Put a warning notice to tell persons not to start the engine.

 (2)
 Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NACELLES/PYLONS(31)