曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Subtask 54-51-17-220-057
 J. Inspection of the Pylon-to-Wing Forward Attach-Fitting
 (1) Do a detailed inspection of the pylon-to-wing forward attach-fitting and make sure that the dimensions are correct. (Ref. Fig. 602/TASK 54-51-17-991-009)
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 1.7340 | 1.7346 | | | 1.7337 | | | | OD 3 |(44.043) |(44.058) | | |(44.035) | | | | | | | -0.0023 | -0.0007 | | | 0.0000| | | | |-(0.058) |-(0.017) | | |(0.000) | | A | 1.7323 | 1.7333 | | | | 1.7337 | | | ID 6 |(44.000) |(44.025) | | | |(44.035) | | -------------------------------------------------------------------------------
Subtask 54-51-17-220-058
 K. Inspection of the Pylon-to-Wing Forward Attach-Fitting
 (1) Do a detailed inspection of the pylon-to-wing forward attach-fitting and make sure that the dimensions are correct. (Ref. Fig. 602/TASK 54-51-17-991-009)

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 1.5738 | 1.5742 | | | 1.5731 | | | | OD 1 |(39.974) |(39.984) | | |(39.956) | | | | | | | 0.0006 | 0.0020 | | | 0.0040| | | | | (0.015) | (0.050) | | |(0.101) | | A | 1.5748 | 1.5758 | | | | 1.5771 | | | ID 8 |(39.999) |(40.025) | | | |(40.058) | | -------------------------------------------------------------------------------
Subtask 54-51-17-220-059
 L. Inspection of the Pylon-to-Wing Forward Attach-Fitting
 (1) Do a detailed inspection of the pylon-to-wing forward attach-fitting and make sure that the dimensions are correct. (Ref. Fig. 602/TASK 54-51-17-991-009)
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 1.5738 | 1.5742 | | | 1.5731 | | | | OD 1 |(39.974) |(39.984) | | |(39.956) | | | | | | | 0.0006 | 0.0020 | | | 0.0040| | | | | (0.015) | (0.050) | | |(0.101) | | A | 1.5748 | 1.5758 | | | | 1.5771 | | | ID 9 |(39.999) |(40.025) | | | |(40.058) | | -------------------------------------------------------------------------------
Subtask 54-51-17-220-060
 M. Inspection of the Pylon-to-Wing Spigot Attach-Fitting
 (1) Do a detailed inspection of the pylon-to-wing spigot attach-fitting and make sure that the dimensions are correct. (Ref. Fig. 603/TASK 54-51-17-991-010)

 Spigot Attach Fitting
 Figure 603/TASK 54-51-17-991-010
 1EFF :  ALL  1  54-51-17 Page 615 
1  1  Feb 01/98
 1  1
 1CES  1

 

 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 2.8335 | 2.8343 | | | 2.8327 | | | | OD 13 |(71.970) |(71.991) | | |(71.950) | | | | | | | 0.0003 | 0.0023 | | | 0.0047| | | | | (0.007) | (0.058) | | |(0.119) | | A | 2.8346 | 2.8358 | | | | 2.8374 | | | ID 12 |(71.998) |(72.029) | | | |(72.069) | | -------------------------------------------------------------------------------
Subtask 54-51-17-220-061
 N. Inspection of the Pylon-to-Wing Spigot Attach-Fitting
 (1) Do a detailed inspection of the pylon-to-wing spigot attach-fitting and make sure that the dimensions are correct. (Ref. Fig. 603/TASK 54-51-17-991-010)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NACELLES/PYLONS(65)