(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
Aft Fixed Fairing
Figure 601/TASK 54-54-00-991-003
1EFF : ALL 1 54-54-00 Page 604
1 1 Feb 01/98
1 1
1CES 1
Upper Forward Attach-Fitting of the Fixed Fairing
Figure 602/TASK 54-54-00-991-004
1EFF : ALL 1 54-54-00 Page 605
1 1 Feb 01/98
1 1
1CES 1
Lower Forward Attach-Fitting of the Fixed Fairing
Figure 603/TASK 54-54-00-991-005
1EFF : ALL 1 54-54-00 Page 606
1 1 Feb 01/98
1 1
1CES 1
Aft Attach-Fitting of the Fixed Fairing
Figure 604/TASK 54-54-00-991-006
1EFF : ALL 1 54-54-00 Page 607
1 1 Feb 01/98
1 1
1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 0.3740 | 0.3745 | | | 0.3728 | | | | OD 1 | (9.499) | (9.512) | | | (9.469) | | | | | | | 0.0003 | 0.0022 | | | 0.0046| | | | | (0.007) | (0.055) | | |(0.116) | | E | 0.3748 | 0.3762 | | | | 0.3774 | | | ID 3 | (9.519) | (9.555) | | | | (9.585) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-052
C. Inspection of the Aft Fixed Fairing
(Ref. Fig. 603/TASK 54-54-00-991-005)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 0.4718 | 0.4722 | | | 0.4711 | | | | OD 3 |(11.983) |(11.993) | | |(11.965) | | | | | | | 0.0002 | 0.0013 | | | 0.0028| | | | | (0.005) | (0.033) | | |(0.071) | | E | 0.4724 | 0.4731 | | | | 0.4739 | | | ID 4 |(11.998) |(12.016) | | | |(12.037) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-053
D. Inspection of the Aft Fixed Fairing
(Ref. Fig. 602/TASK 54-54-00-991-004)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 0.3740 | 0.3745 | | | 0.3733 | | | | OD 5 | (9.499) | (9.512) | | | (9.481) | | | | | | | 0.0003 | 0.0014 | | | 0.0028| | | | | (0.007) | (0.035) | | |(0.071) | | F | 0.3748 | 0.3754 | | | | 0.3761 | | | ID 6 | (9.519) | (9.535) | | | | (9.552) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-054
E. Inspection of the Aft Fixed Fairing
(Ref. Fig. 602/TASK 54-54-00-991-004)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 0.3740 | 0.3745 | | | 0.3728 | | | | OD 5 | (9.499) | (9.512) | | | (9.469) | | | | | | | 0.0003 | 0.0022 | | | 0.0046| | | | | (0.007) | (0.055) | | |(0.116) | | F | 0.3748 | 0.3762 | | | | 0.3774 | | | ID 7 | (9.519) | (9.555) | | | | (9.585) | | -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NACELLES/PYLONS(95)
