3. Fault Confirmation
__________________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 A. Test
 Do the EIS input test (Ref. AMM TASK 31-60-00-740-002).

R **ON A/C 401-499,
 A. Test
 Do the EIS input test (Ref. AMM TASK 31-60-00-740-002).

 **ON A/C ALL
 4. Fault Isolation
_______________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 A. If the test gives the maintenance message DMC3 : DU ND1 POS PIN:
 - do a check for ground signals at CAPT ND (3WT1) connector AA (Ref. AWM 31-68-06).
 (1) If the wiring is incorrect:
 - repair the wiring.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞31-63-81∞∞∞∞∞∞∞∞∞∞Page 288
 Aug 01/05 CES (2) If the wiring is correct:

 - replace the ND-CAPT (3WT1) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001).
 B. Do the test given in Para. 3.
R **ON A/C 401-499,
 A. If the test gives the maintenance message WRG: PIN PROG/DU ND CAPT(3WT1)
 - do a check for ground signals at CAPT ND (3WT1) connector AA (Ref. AWM 31-68-06).
 (1) If the wiring is not correct:

 - repair the wiring.

 (2) If the wiring is correct:

 - replace the ND-CAPT (3WT1) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001).
 B. Do the test given in Para. 3.

 TASK 31-63-81-810-845
 Failure of the CAPT PFD Pin Programming Detected by the DMC3
 1. Possible Causes
_______________
 - PFD-CAPT (2WT1)

 - ground signals at CAPT PFD (2WT1) connector AA

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 31-60-00-740-002 EIS Input Test
 AMM 31-63-22-000-001 Removal of the Display Unit
 (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2)
 AMM 31-63-22-400-001 Installation of the Display Unit
 (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2)
 AWM 31-68-06

 3. Fault Confirmation
__________________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 A. Test
 Do the EIS input test (Ref. AMM TASK 31-60-00-740-002).

R **ON A/C 401-499,
 A. Test
 Do the EIS input test (Ref. AMM TASK 31-60-00-740-002).

 4. Fault Isolation
_______________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 A. If the test gives the maintenance message DMC3 : DU PFD1 POS PIN:
 - do a check for ground signals at CAPT PFD (2WT1) connector AA (Ref. AWM 31-68-06).
 (1) If the wiring is incorrect:

 - repair the wiring.

 (2) If the wiring is correct:

 - replace the PFD-CAPT (2WT1) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001).
 B. Do the test given in Para. 3.
R **ON A/C 401-499,
 A. If the test gives the maintenance message WRG: PIN PROG/DU PFD CAPT(2WT1)
 - do a check for ground signals at CAPT PFD (2WT1) connector AA (Ref. AWM 31-68-06).
 (1) If the wiring is incorrect:

 - repair the wiring.

 (2) If the wiring is correct:

 - replace the PFD-CAPT (2WT1) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001).
 B. Do the test given in Para. 3.

R **ON A/C ALL
 TASK 31-63-81-810-846
 Failure of the CAPT ND Detected by the DMC3
 1. Possible Causes
_______________
 - DMC-3 (1WT3)

 - ND-CAPT (3WT1)

 - wiring

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-60-00-740-002 EIS Input Test
 AMM 31-63-22-000-001 Removal of the Display Unit
 (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2)
 AMM 31-63-22-400-001 Installation of the Display Unit

 (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2)
 AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3)
 AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
 ASM 31-61/04
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 指示和記錄系統 3(24)