AMM 31-60-00-860-001 EIS Start Procedure
 AMM 31-60-00-860-002 EIS Stop Procedure
 AMM 31-63-22-000-001 Removal of the Display Unit

 (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2)
 AMM 31-63-22-400-001 Installation of the Display Unit

 (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2)
 AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3)
 AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)

 3. Fault Confirmation
__________________
 A. Aircraft Maintenance Configuration
 (1) Energize the aircraft electrical circuits
 (Ref. AMM TASK 24-41-00-861-002)

 (2) Do the EIS start procedure (Ref. AMM TASK 31-60-00-860-001)

 - Make sure there is no PFD/ND transfer or no ECAM/ND transfer

 (3) On the center pedestal, on the SWITCHING panel 8VU:

 - set the EIS DMC selector switch to NORM
 B. Test
 (1) Do the System Test of the DMC3 (Ref. AMM TASK 31-60-00-740-004)
 - refer to Para. 4.A.
 C. Test
 (1) Do the System Test of the DMC2 (Ref. AMM TASK 31-60-00-740-004)
 - refer tp Para. 4. B.
 D. Test
 (1) Do the System Test of the DMC1 (Ref. AMM TASK 31-60-00-740-004)
 - refer to Para. 4.C.
 4. Fault Isolation
_______________
 A. If the test gives :
 (1) the maintenance message: DMC3(1WT3)

 - replace the DMC-3 (1WT3) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001)

 (2) the maintenance message: DU PFD CAPT(2WT1)

 - replace the PFD-CAPT (2WT1) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001)
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 401-499, ∞∞31-63-81∞∞∞∞∞∞∞∞∞∞Page C224
 Aug 01/05 CES

 (3) the maintenance message: DU PFD FO(2WT2)

 - replace the PFD-F/O (2WT2) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001)

 (4) the maintenance message: DU PFD CAPT(2WT1)/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-81-810-973)

 (5) the maintenance message: DU PFD FO(2WT2)/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-81-810-974)

 (6) the maintenance message: DU PFD FO(2WT2)/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-81-810-974)

 (7) the maintenance message: EEC(E1-4000KS)BUS EEC1A/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-00-810-890)

 (8) the maintenance message: EEC(E1-4000KS)BUS EEC1B/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-00-810-891)

 (9) the maintenance message: EEC(E2-4000KS)BUS EEC2A/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-00-810-892)
 (10) the maintenance message: EEC(E2-4000KS)BUS EEC2B/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-00-810-893)

 (11) the maintenance message: EEC(E1-4000KS)/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-81-810-924)

 (12) the maintenance message: EEC(E2-4000KS)/DMC3(1WT3)

 - do the relative fault isolation procedure (Ref. TASK 31-63-81-810-927)
 B. If the test gives :
 (1) the maintenance message: DMC2(1WT2)

 - replace the DMC-2 (1WT2) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001)

 (2) the maintenance message: DU PFD FO(2WT2)

 - replace the PFD-F/O (2WT2) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001)
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 401-499, ∞∞31-63-81∞∞∞∞∞∞∞∞∞∞Page C225
 Aug 01/05 CES

 (3) the maintenance message: DU PFD FO(2WT2)/DMC2(1WT2)

 - do the relative fault isolation procedure (Ref. TASK 31-63-81-810-968)

 (4) the maintenance message: EEC(E1-4000KS)BUS EEC1A/DMC2(1WT2)

 - do the relative fault isolation procedure (Ref. TASK 31-63-00-810-882)

 (5) the maintenance message: EEC(E1-4000KS)BUS EEC1B/DMC2(1WT2)

 - do the relative fault isolation procedure (Ref. TASK 31-63-00-810-883)

 (6) the maintenance message: EEC(E2-4000KS)BUS EEC2A/DMC2(1WT2)

 - do the relative fault isolation procedure (Ref. TASK 31-63-00-810-884)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 指示和記錄系統 3(90)