- replace the DMC-2 (1WT2) and the DU-ECAM, UPPER (4WT1) (Ref. AMM TASK 31-63-34-000-001) (Ref. AMM TASK 31-63-34-400-001) (Ref. AMM TASK 31-63-22-000-001) (Ref. AMM TASK 31-63-22-400-001)
B. Do the EIS system test (Ref. AMM TASK 31-60-00-740-004)
(1) If the test gives the maintenance message DU PFD FO(2WT2)/DMC2(1WT2)
- replace the PFD-F/O (2WT2) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001) Feedback Message from the DMC1 on the FO ND DU
1. Possible Causes
_______________
- DMC-1 (1WT1)
- DU-ECAM, LOWER (4WT2)
- ND-F/O (3WT2)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-60-00-740-004 EIS System Test AMM 31-63-22-000-001 Removal of the Display Unit (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-22-400-001 Installation of the Display Unit
(2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3) AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
3. Fault Confirmation
__________________
A. Test
- Not applicable, the fault cannot be confirmed.
4. Fault Isolation
_______________
A. Read the Post Flight Report
(1) If the PFR gives the maintenance message:
DMC1(1WT1)/DU SD(4WT2)/DU ND FO(3WT2)
- replace the DMC-1 (1WT1) and the DU-ECAM, LOWER (4WT2) (Ref. AMM TASK 31-63-34-000-001) (Ref. AMM TASK 31-63-34-400-001) (Ref. AMM TASK 31-63-22-000-001) (Ref. AMM TASK 31-63-22-400-001)
B. Do the EIS system test (Ref. AMM TASK 31-60-00-740-004)
(1) If the test gives the maintenance message DU ND FO(3WT2)/DMC1(1WT1)
- replace the ND-F/O (3WT2) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001) Feedback Message from the DMC1 on the CAPT ND DU
1. Possible Causes
_______________
- DMC-1 (1WT1)
- DU-ECAM, LOWER (4WT2)
- ND-CAPT (3WT1)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-60-00-740-004 EIS System Test AMM 31-63-22-000-001 Removal of the Display Unit (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-22-400-001 Installation of the Display Unit
(2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3) AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
3. Fault Confirmation
__________________
A. Test
- Not applicable, the fault cannot be confirmed.
4. Fault Isolation
_______________
A. Read the Post Flight Report
(1) If the PFR gives the maintenance message:
DMC1(1WT1)/DU SD(4WT2)/DU ND CAPT(3WT1)
- replace the DMC-1 (1WT1) and the DU-ECAM, LOWER (4WT2) (Ref. AMM TASK 31-63-34-000-001) (Ref. AMM TASK 31-63-34-400-001) (Ref. AMM TASK 31-63-22-000-001) (Ref. AMM TASK 31-63-22-400-001)
B. Do the EIS system test (Ref. AMM TASK 31-60-00-740-004)
(1) If the test gives the maintenance message DU ND CAPT(3WT1)/DMC1(1WT1)
- replace the ND-CAPT (3WT1) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001) Feedback Message from the DMC3 on the FO ND DU
1. Possible Causes
_______________
- DMC-3 (1WT3)
- DU-ECAM, LOWER (4WT2)
- ND-F/O (3WT2)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-60-00-740-004 EIS System Test AMM 31-63-22-000-001 Removal of the Display Unit (2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-22-400-001 Installation of the Display Unit
(2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3) AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
3. Fault Confirmation
__________________
A. Test
- Not applicable, the fault cannot be confirmed.
4. Fault Isolation
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 指示和記錄系統(tǒng) 3(96)
