3. Fault Confirmation
__________________
A. Test Do the operational test of the DMC/DU Data Bus (Ref. AMM TASK 31-60-00-720-002)
4. Fault Isolation
_______________
A. If the test gives:
(1) the maintenance message DU ND CAPT(3WT1)/WRG: DMC1 (1WT1)
- check the wiring between the DMC1 and the CAPT ND DU (3WT1) (Ref. ASM 31-61/00)
(a) if the wiring is correct:
- replace the ND-CAPT (3WT1) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001)
(b) If the fault continues:
- replace the DMC-1 (1WT1) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001)
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 401-499, ∞∞31-63-81∞∞∞∞∞∞∞∞∞∞Page B294
Aug 01/05 CES Failure of the A629 BUS from the FO PFD DU to the DMC1
1. Possible Causes
_______________
- PFD-F/O (2WT2)
- DMC-1 (1WT1)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-63-81-810-968 Failure of the A629 BUS from the FO PFD DU to the
DMC2 AMM 31-60-00-720-002 Operational Test of the DMC/DU data bus AMM 31-63-22-000-001 Removal of the Display Unit
(2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-22-400-001 Installation of the Display Unit
(2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3) AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3) ASM 31-61/00
3. Fault Confirmation
__________________
A. Test
(1) Make sure that the DMC2 is correctly installed (Ref. AMM TASK 31-63-34-400-001)
(2) Do the operational test of the DMC/DU Data Bus (Ref. AMM TASK 31-60-00-720-002)
4. Fault Isolation
_______________
A. If the test gives:
(1) the maintenance message DU PFD FO (2WT2)/WRG: DMC2 (1WT2)
- do the relative fault isolation procedure (Ref. TASK 31-63-81-810-968)
(2) the maintenance message DU PFD FO (2WT2)/WRG: DMC1 (1WT1)
- check the wiring between the DMC1 and the FO PFD DU (2WT2) (Ref. ASM 31-61/00)
(a) if the wiring is correct:
- replace the PFD-F/O (2WT2) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001)
(b) If the fault continues:
- replace the DMC-1 (1WT1) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001)
B. Do the test given in Para. 3.
Failure of the A629 BUS from the FO ND DU to the DMC1
1. Possible Causes
_______________
- ND-F/O (3WT2)
- DMC-1 (1WT1)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-63-81-810-969 Failure of the A629 BUS from the FO ND to the DMC2 AMM 31-60-00-720-002 Operational Test of the DMC/DU data bus AMM 31-63-22-000-001 Removal of the Display Unit
(2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-22-400-001 Installation of the Display Unit
(2WT1,2WT2,3WT1,3WT2,4WT1,4WT2) AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3) AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3) ASM 31-61/00
3. Fault Confirmation
__________________
A. Test
(1) Make sure that the DMC2 is correctly installed (Ref. AMM TASK 31-63-34-400-001)
(2) Do the operational test of the DMC/DU Data Bus (Ref. AMM TASK 31-60-00-720-002)
4. Fault Isolation
_______________
A. If the test gives:
(1) the maintenance message DU ND FO (3WT2)/WRG: DMC2 (1WT2)
- do the relative fault isolation procedure (Ref. TASK 31-63-81-810-969)
(2) the maintenance message DU ND FO (3WT2)/WRG: DMC1 (1WT1)
- check the wiring between the DMC1 and the FO ND DU (3WT1) (Ref. ASM 31-61/00)
(a) if the wiring is correct:
- replace the ND-F/O (3WT2) (Ref. AMM TASK 31-63-22-000-001) and (Ref. AMM TASK 31-63-22-400-001)
(b) If the fault continues:
- replace the DMC-1 (1WT1) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 指示和記錄系統 3(83)
