(5) If the fault continues:

 - do a check and repair the wiring from the BSCU (10GG) to the feedback sensor (4GC) pins AB/14E, 14F, 10E, 10F, 11F, 11E to pins A/A, B, C, D, E, F (Ref. ASM 32-51/01).

 (6) If the fault continues:

 - do a check and repair the wiring from the BSCU (10GG) to the N/S steering servo control (6GC) pins AB/12E, 12F, 13E, 13F, 14E, 14F to pins A/G, H, E, F, C, D (Ref. ASM 32-51/01).

 (7) If the fault continues:

 - do a check and repair the wiring from the BSCU (10GG) to the feedback sensor (3GC) pins AB/15E, 15F, 8E, 8F, 9E, 9F to pins A/A, B, C, D, E, F (Ref. ASM 32-51/01).

 (8) If the fault continues:

 - do the check of the charge pressure of the nose landing gear shock absorber (Ref. AMM TASK 12-14-32-614-004)
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page 229
 Aug 01/05 CES **ON A/C ALL

 B. Do the test given in Para. 3.A.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page 230
 May 01/04R
 CES  TASK 32-51-00-810-813

 Nosewheel Steering Deactivation Inoperative
 1. Possible Causes
_______________
 - ELEC BOX-N/W STEERING,DEACTIVATION (5GC)

 - BSCU (10GG)

 - wiring from the electrical box (5GC) pin A/C to the ground terminal

 - wiring from the BSCU (10GG) to the electrical box (5GC)

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 32-42-34-000-001 Removal of the Braking/Steering Control Unit (BSCU) (10GG) AMM 32-42-34-400-001 Installation of the Braking/Steering Control Unit (BSCU) (10GG) AMM 32-51-00-720-005 Functional Test of the Nose Wheel Steering Deactivation Electrical-Box AMM 32-51-12-000-001 Removal of the Nose Wheel Steering Deactivation Electrical Box AMM 32-51-12-400-001 Installation of the Nose Wheel Steering Deactivation Electrical Box ASM 32-51/01
 3. Fault Confirmation
__________________
 A. Test Do the functional test of the nose wheel steering deactivation electrical box (Ref. AMM TASK 32-51-00-720-005).
 4. Fault Isolation
_______________
 A. If during the test, the N.WHEEL STEER DISC memo indication does not come into view on the upper ECAM DU:
 - replace the ELEC BOX-N/W STEERING,DEACTIVATION (5GC) (Ref. AMM TASK 32-51-12-000-001) and (Ref. AMM TASK 32-51-12-400-001).
 (1) If the fault continues:
 - do a check for a ground signal at pin A/C of the electrical box (5GC) (Ref. ASM 32-51/01).
 (a) If there is no ground signal:
 - repair the wiring from the electrical box (5GC) pin A/C to the ground terminal (Ref. ASM 32-51/01).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page 231
 May 01/04R CES

 (b) If there is a ground signal:
 - do a check and repair the wiring from the BSCU (10GG) to the electrical box (5GC) pin AB/8D to pin A/D (Ref. ASM 32-51/01).
 (2) If the fault continues:
 - replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
 B. Test Do the test given in Para. 3.A.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page 232
 May 01/04R
 CES  TASK 32-51-00-810-814

 Failure of the Selector Valve
 1. Possible Causes
_______________
 - BSCU (10GG) R - SERVO CTL-N/W STEERING (7GC)

 - steering selector valve

 - wiring from the BSCU (10GG) to the servo control (6GC)

 - wiring from the servo control (6GC) pin A/K to the ground terminal R - wiring from the selector valve (7GC) to the BSCU (10GG)

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 起落架 LANDING GEAR 2(105)