R AMM 32-51-23-000-001 Removal of the Selector Valve Manifold-Assembly
R AMM 32-51-23-400-001 Installation of the Selector Valve Manifold-Assembly AMM 32-51-51-000-003 Removal of the Nose Wheel Steering Electro-Distributor AMM 32-51-51-400-003 Installation of the Nose Wheel Steering Electro-Distributor ASM 32-51/01
3. Fault Confirmation
__________________
A. Test
(1) Do the functional test of the Nose Wheel Steering with the handwheel (Ref. AMM TASK 32-51-00-720-003).
(2) Do the ground scanning of the BSCU (Ref. AMM TASK 32-46-00-740-002).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page 233
Aug 01/05 CES
4. Fault Isolation
_______________
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 301-399,
A. If the test gives the maintenance message STEERING ELECTRO-HYD MODULE 6GC or BSCU:
- replace the steering selector valve (Ref. AMM TASK 32-51-51-000-003) and (Ref. AMM TASK 32-51-51-400-003).
(1) If the fault continues:
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
(2) If the fault continues:
- do a check for a ground signal at pin A/K of the servo control (6GC) (Ref. ASM 32-51/01).
(a) If there is a ground signal:
- do a check and repair the wiring from the BSCU (10GG) to the servo control (6GC): pin AB/12D to pin A/J (Ref. ASM 32-51/01).
(b) If there is no ground signal:
- do a check and repair the wiring from the servo control (6GC) pin A/K to the ground terminal (Ref. ASM 32-51/01).
(3) If the fault continues:
- do the check of the charge pressure of the nlg shock absorber. (Ref. AMM TASK 12-14-32-614-004).
**ON A/C 106-149, 221-299,
A. If the test gives the maintenance message STEERING ELECTRO-HYD MODULE(6GC)/ BSCU(10GG):
- replace the steering selector valve (Ref. AMM TASK 32-51-51-000-003) and (Ref. AMM TASK 32-51-51-400-003).
(1) If the fault continues:
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
(2) If the fault continues:
- do a check for a ground signal at pin A/K of the servo control (6GC) (Ref. ASM 32-51/01).
(a) If there is a ground signal:
- do a check and repair the wiring from the BSCU (10GG) to the servo control (6GC): pin AB/12D to pin A/J (Ref. ASM 32-51/01).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page 234
Aug 01/05R CES
(b) If there is no ground signal: - do a check and repair the wiring from the servo control (6GC) pin A/K to the ground terminal (Ref. ASM 32-51/01).
(3) If the fault continues: - do the check of the charge pressure of the nlg shock absorber. (Ref. AMM TASK 12-14-32-614-004).
R **ON A/C 401-499,
R R R R A. If the test gives the maintenance message STEERING SELECTOR VALVE(7GC)/ BSCU(10GG): - replace the SERVO CTL-N/W STEERING (7GC) (Ref. AMM TASK 32-51-23-000-001) and (Ref. AMM TASK 32-51-23-400-001).
R R R (1) If the fault continues: - replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
R R R (2) If the fault continues: - do a check and repair the wiring from the selector valve (7GC) to the BSCU (10GG)
R R R (3) If the fault continues: - do the check of the charge pressure of the nlg shock absorber. (Ref. AMM TASK 12-14-32-614-004).
**ON A/C ALL
B. Test Do the test given in Para. 3.A.
TASK 32-51-00-810-815
Nosewheel Steering Order Disagree
1. Possible Causes_______________
- BSCU (10GG)
- XMTR UNIT-N/W STRG HANDWHEEL,CAPT (1GC)
- XMTR UNIT-N/W STRG HANDWHEEL,F/O (2GC)
- XDCR UNIT-PEDAL POS, L (25CE1)
- XDCR UNIT-PEDAL POS, R (25CE2)
- wiring from the BSCU (10GG) to the handwheel (1GC)
- wiring from the BSCU (10GG) to the handwheel (2GC) 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 起落架 LANDING GEAR 2(106)
