TASK 32-42-00-810-938 Disagree between BSCU COM and MON for ground spoilers 2 & 3 signals
1. Possible Causes
_______________
- BSCU (10GG)
- wiring from the BSCU to the SEC2 (1CE2) and SEC3 (1CE3)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 32-42-34-000-001 Removal of the Braking/Steering Control Unit (BSCU) (10GG) AMM 32-42-34-400-001 Installation of the Braking/Steering Control Unit
(BSCU) (10GG) AMM 32-46-00-740-005 BITE Test of the Normal Braking System ASM 32-46/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the Normal Braking System (Ref. AMM TASK 32-46-00-740-005)
4. Fault Isolation
_______________
A. If the test gives the maintenance messages:SEC2(1CE2)/BSCU(10GG) and SEC3(1CE3)/BSCU(10GG).
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) (Ref. AMM TASK 32-42-34-400-001)
(1) If the fault continues:
- do a check and repair the wiring from the BSCU to the SEC2 (1CE2) and SEC3 (1CE3). (Ref. ASM 32-46/01)
B. Do the test given in Para.3.A.
TASK 32-42-00-810-939
Disagree between BSCU COM and MON for ground spoilers 1 & 2 & 3 signals
1. Possible Causes
_______________
- BSCU (10GG)
- wiring from the BSCU (10GG) to the SEC1 (1CE1) and SEC2 (1CE2) and SEC3 (1CE3)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 32-42-34-000-001 Removal of the Braking/Steering Control Unit (BSCU) (10GG) AMM 32-42-34-400-001 Installation of the Braking/Steering Control Unit
(BSCU) (10GG)
AMM 32-46-00-740-005 BITE Test of the Normal Braking System
ASM 32-46/01
3. Fault Confirmation
__________________
A. Test.
(1) Do the BITE test of the Normal Braking System.(Ref. AMM TASK 32-46-00-740-005)
4. Fault Isolation
_______________
A. If the test gives the maintenance messages:SEC1(1CE1)/BSCU(10GG) and SEC2(1CE2)/BSCU(10GG) and SEC3(1CE3)/BSCU(10GG).
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) (Ref. AMM TASK 32-42-34-400-001)
(1) If the fault continues:
- do a check and repair the wiring from the BSCU (10GG) to the SEC1 (1CE1) and SEC2 (1CE2) and SEC3 (1CE3) (Ref. ASM 32-46/01)
B. Do the test given in Para.3.A.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 221-299, 401-499, ∞∞32-42-00∞∞∞∞∞∞∞∞∞∞Page A252
Aug 01/05 CES
TASK 32-42-00-810-940
Failure of the tachometer drives on the left gear
1. Possible Causes
_______________
- DRIVE ASSY-TACHOMETER,WHEEL 1 (2681GM)
- DRIVE ASSY-TACHOMETER,WHEEL 2 (2680GM)
- TACHOMETER-WHEEL 1 (19GG)
- TACHOMETER-WHEEL 2 (21GG)
- wiring from the tachometers to the BSCU (10GG)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 起落架 LANDING GEAR 2(28)
