(2) Make sure that there is a Yellow pressure indication on the triple indicator.

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-44-00∞∞∞∞∞∞∞∞∞∞Page 207
 Feb 01/98 CES

 TASK 32-44-00-810-805
 Loss of the Accumulator Yellow-Pressure Indication on the Triple Indicator
 (Electrical Failure)
 1. Possible Causes
_______________
 - PRESS XDCR-BRK,Y (3068GN)

 - IND-BRK YELLOW PRESS TRIPLE (60GG)

 - wiring from the pressure transducer (3068GN) pin A/F,B to the ground

 - wiring from the pressure transducer (3068GN) to the triple indicator (60GG)

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 29-24-00-863-001 Pressurize the Yellow Hydraulic System with the
 Electric Pump AMM 29-24-00-864-001 Depressurize the Yellow Hydraulic System AMM 29-32-11-000-004 Removal of the Hydraulic Pressure Transducer (3068GN) AMM 29-32-11-400-004 Installation of the Hydraulic Pressure Transducer
 (3068GN) AMM 32-44-21-000-001 Removal of the Brake Yellow Pressure Triple Indicator (60GG) AMM 32-44-21-400-001 Installation of the Brake Yellow Pressure Triple
 Indicator (60GG)
 ASM 32-44/01
 AWM 32-44-01

 3. Fault Confirmation
__________________
 A. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
 -------------------------------------------------------------------------------
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 49VU L/G/Y BRK/PRESS/IND 61GG C10
R **ON A/C 401-499,
R 49VU ABCU &/Y BRK/PRESS IND 61GG C10
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-44-00∞∞∞∞∞∞∞∞∞∞Page 208
 Aug 01/05 CESR **ON A/C ALL

 B. Pressurize the Yellow hydraulic system
 (Ref. AMM TASK 29-24-00-863-001)

 C. Test Make sure that there is no accumulator Yellow-pressure indication on the triple indicator.
 4. Fault Isolation
_______________
 A. If the test confirms the fault:
 - replace the PRESS XDCR-BRK,Y (3068GN) (Ref. AMM TASK 29-32-11-000-004) and (Ref. AMM TASK 29-32-11-400-004).
 (1) If the fault continues:
 - replace the IND-BRK YELLOW PRESS TRIPLE (60GG) (Ref. AMM TASK 32-44-21-000-001) and (Ref. AMM TASK 32-44-21-400-001).
 (a) If the fault continues:
 - do a check for a ground signal at pins A/F, B of the pressure transducer (3068GN) (Ref. ASM 32-44/01).
 1 If there is no ground signal:
_

 - repair the wiring from the pressure transducer (3068GN) pin A/F,B to the ground (Ref. ASM 32-44/01).
 2 If there is a ground signal:
_

 - do a check for continuity from the pressure transducer (3068GN) pin A/A to the terminal block (7502VT) pin 2/J (Ref. AWM 32-44-01).
 a If there is no continuity:
_ - repair the related wiring (Ref. AWM 32-44-01).

 b If there is continuity:
_

 - do a check and repair the wiring from the pressure transducer (3068GN) to the triple indicator (60GG): pins A/D, E to pins A/D, E (Ref. ASM 32-44/01).
 B. Test Make sure that there is an accumulator Yellow-pressure indication on the triple indicator.
 5. Close-up
________
 A. Depressurize the Yellow hydraulic system
 (Ref. AMM TASK 29-24-00-864-001).

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-44-00∞∞∞∞∞∞∞∞∞∞Page 209
 Aug 01/05 CES TASK 32-44-00-810-806

 Loss of the Right Yellow-Pressure Indication on the Triple Indicator
 (Electrical Failure)
 1. Possible Causes
_______________
 - IND-BRK YELLOW PRESS TRIPLE (60GG)

 - wiring from the triple indicator (60GG) pins A/J, C to the first terminal block

 2. Job Set-up Information
______________________
 A. Referenced Information
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 起落架 LANDING GEAR 2(52)