(4GW,5GW,6GW,7GW)
AMM 32-47-15-400-001 Installation of the Brake Temperature Sensor
(4GW,5GW,6GW,7GW) R AMM 32-47-18-000-001 Removal of the Brake Temperature Monitoring Unit R AMM 32-47-18-400-001 Installation of the Brake Temperature Monitoring Unit
ASM 32-47/01
3. Fault Confirmation
__________________
A. Test Do the BITE test of the BSCU: (Ref. AMM TASK 32-46-00-740-001).
4. Fault Isolation
_______________
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 301-399,
A. If the test gives the maintenance message BRAKE TEMP SENSOR 6GW OR MON IT UNIT 2GW:
- replace the SENSOR - BRK TEMP, WHEEL 4 (6GW) (Ref. AMM TASK 32-47-15-000-001) and (Ref. AMM TASK 32-47-15-400-001).
(1) If the fault continues:
- replace the MONITORING UNIT-BRK TEMP, R1 (2GW) (Ref. AMM TASK 32-47-18-000-001) and (Ref. AMM TASK 32-47-18-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-47-00∞∞∞∞∞∞∞∞∞∞Page 225
May 01/05 CES
(2) If the fault continues:
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) (Ref. AMM TASK 32-42-34-400-001).
(3) If the fault continues:
- do a check and repair the wiring from the MONITORING UNIT (2GW) to the BSCU (10GG). (Ref. ASM 32-47/01).
(4) If the fault continues:
- do a check and repair the wiring from the SENSOR (6GW) to the MONITORING UNIT (2GW). (Ref. ASM 32-47/01).
R **ON A/C 106-149, 221-299, 401-499,
A. If the test gives the maintenance message BRAKE TEMP
SENSOR4(6GW)/BTMU(2GW):
- replace the SENSOR - BRK TEMP, WHEEL 4 (6GW) (Ref. AMM TASK 32-47-15-000-001) and (Ref. AMM TASK 32-47-15-400-001).
(1) If the fault continues:
- replace the MONITORING UNIT-BRK TEMP, R1 (2GW) (Ref. AMM TASK 32-47-18-000-001) and (Ref. AMM TASK 32-47-18-400-001).
(2) If the fault continues:
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) (Ref. AMM TASK 32-42-34-400-001).
(3) If the fault continues:
- do a check and repair the wiring from the MONITORING UNIT (2GW) to the BSCU (10GG). (Ref. ASM 32-47/01).
(4) If the fault continues:
- do a check and repair the wiring from the SENSOR (6GW) to the MONITORING UNIT (2GW). (Ref. ASM 32-47/01).
**ON A/C ALL
B. Test
Do the test given in Para. 3.A.
BRAKE COOLING - FAULT ISOLATION PROCEDURES
__________________________________________
TASK 32-48-00-810-801
Brake Fan Inoperative on One Brake
1. Possible Causes
_______________
- MOTOR ASSY-BRK FAN,WHEEL AXLE 1 (7GS)
- MOTOR ASSY-BRK FAN,WHEEL AXLE 2 (9GS)
- MOTOR ASSY-BRK FAN,WHEEL AXLE 3 (8GS)
- MOTOR ASSY-BRK FAN,WHEEL AXLE 4 (10GS)
- impeller
- wiring from the brake-fan motor assy pin A/1, 2, 3 to the first terminal block
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 32-48-00-710-001 Functional Test of The Brake Cooling System
AMM 32-48-51-000-002 Removal of the Impeller Assy
AMM 32-48-51-000-005 Removal of the Fan Assy (7GS,8GS,9GS,10GS)
AMM 32-48-51-400-002 Installation of the Impeller Assy
AMM 32-48-51-400-005 Installation of the Fan Assy (7GS,8GS,9GS,10GS)
ASM 32-48/01
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the brake cooling system (Ref. AMM TASK 32-48-00-710-001).
(2) Make sure that the fan does not operate on the related brake.
4. Fault Isolation
_______________
A. If the test confirms the fault:
- do a check of the related impeller
(1) If the impeller is not OK:
- replace the impeller. (Ref. AMM TASK 32-48-51-000-002) and (Ref. AMM TASK 32-48-51-400-002)
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 051-099, 301-399, 401-499, ∞∞32-48-00∞∞∞∞∞∞∞∞∞∞Page 201
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 起落架 LANDING GEAR 2(79)
