-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page 205
 --Aug 01/05 ---CES -

R R R  * - replace the SENSOR-EXCHANGER OUT TEMP, ENG 1 (6HA1) (Ref. AMM TASK 36-11-17-000-001) and (Ref. AMM TASK 36-11-17-400-001). 
R  **ON A/C ALL
 B. Test
 (1) Do the engine start procedure (Ref. AMM TASK 71-00-00-710-003).
 (2) Make sure that the ECAM warning AIR ENG 1 BLEED FAULT is not shown on the upper ECAM DU.
 (3) Make sure that the bleed temperature is between 150 deg. and 200 deg..

 1 -EFF : ALL

-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page 206
 --Feb 01/05 ---CES - Loss of the BMC2

 1. Possible Causes
_______________
 -BMC-2 (1HA2)

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 36-11-00-740-001 BITE Test of the BMC 1(2)
 AMM 36-11-34-000-001 Removal of the BMC (1HA1, 1HA2)
 AMM 36-11-34-400-001 Installation of the BMC (1HA1, 1HA2)

 3. Fault Confirmation

__________________
 A. Test

 (1) Do the BITE test of the BMC2 (Ref. AMM TASK 36-11-00-740-001).
 4. Fault Isolation
_______________

 A. If the test gives the maintenance message:
 BMC2

 -replace the BMC-2 (1HA2) (Ref. AMM TASK 36-11-34-000-001) and (Ref. AMM TASK 36-11-34-400-001).
 B. Do the test given in para. 3.
 1
 -EFF : ALL

-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page 207
 --Feb 01/05R ---CES -

 High Pressure Bleed Valve of the Engine 2 Blocked in the Open Position
 1. Possible Causes
_______________

 -VALVE-HP BLEED (4000HA)
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 36-11-51-000-042 Removal of the High Pressure Bleed Valve (4000HA) AMM 36-11-51-400-042 Installation of the High Pressure Bleed Valve (4000HA)
 3. Fault Confirmation
__________________
 A. Test

 (1) Not applicable, the fault is evident.
 4. Fault Isolation
_______________

 A. If the fault symptom is identified by the maintenance message: HP BLEED-V 4000HA and if the bleed temperature indication is more than 255 deg.C plus or minus 5 deg.C:
 -replace the VALVE-HP BLEED (4000HA) (Ref. AMM TASK 36-11-51-000-042) and (Ref. AMM TASK 36-11-51-400-042).
 B. Test

 (1)
 Do the engine start procedure.

 (2)
 Make sure that the ECAM warning AIR ENG 2 BLEED FAULT is not shown on the upper ECAM DU.

 1
 -EFF : ALL

-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page 208
 --Feb 01/05R ---CES -

 Fan Air Valve of the Engine 2 Blocked in the Closed Position
 1. Possible Causes
_______________

 -THERMOSTAT-FAN AIR VALVE CTL (7170HM2)
 -VALVE-FAN AIR, ENG2 (9HA2)
 -SENSOR-EXCHANGER OUT TEMP, ENG 2 (6HA2)
 -filter of the thermostat (7170HM2)
 -sense line

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 36-11-17-000-001 Removal of the Heat-Exchanger Outlet-Temperature Sensor 6HA1(6HA2) AMM 36-11-17-400-001 Installation of the Heat-Exchanger Outlet-Temperature Sensor 6HA1(6HA2) AMM 36-11-43-000-001 Removal of the Fan Air Valve Control Thermostat (7170HM1, 7170HM2) AMM 36-11-43-000-003 Removal of the Thermostat-Filter of the Fan Air
 Valve-Control

R AMM 36-11-43-100-001 Remove the Thermostat-Filter of the Fan Air
R Valve-Control for Cleaning AMM 36-11-43-400-001 Installation of the Fan Air Valve Control Thermostat (7170HM1, 7170HM2) AMM 36-11-43-400-003 Installation of the Thermostat-Filter of the Fan Air Valve-Control AMM 36-11-54-000-001 Removal of the Fan Air Valve (9HA1,9HA2) AMM 36-11-54-400-001 Installation of the Fan Air Valve (9HA1,9HA2) AMM 36-11-54-720-001 Functional Test of the Opening of the Fan Air Valve AMM 71-00-00-710-003 Engine Automatic Start
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 PNEUMATIC(21)