(i)
Set the R PACK switch to the HIGH position.
(j)
Connect the D490 electrical connector to the R Pack Valve. 1) Make sure the recirculation fan operates.
(k)
Disconnect the D490 electrical connector from the R Pack Valve. 1) Make sure the recirculation fan stops.
(l)
Connect the D486 electrical connector to the L Pack Valve. 1) Make sure the recirculation fan operates.
(m)
Disconnect the D486 electrical connector from the L Pack Valve. 1) Make sure the recirculation fan stops.
F. Put The Airplane Back To Its Usual Condition
S 435-019
(1)
Connect the D486 electrical connector to the L Pack Valve.
S 435-020
(2)
Connect the D490 electrical connector to the R Pack Valve.
S 865-021
(3)
Set these switches to the OFF position:
(a) P5-10 Air-Conditioning Control Module
1) L PACK
2) R PACK
3) RECIRC FAN
S 415-024
(4) Close these access panels:
(a)
3303 - Left Air-Conditioning Access Panel
(b)
3403 - Right Air-Conditioning Access Panel
S 415-025
(5) Install this access panel:
(a) Access Panel, Right - Forward Cargo Compartment, Aft Bulkhead
S 865-022
(6) Remove the electrical power from the airplane if it is no longer necessary (Ref 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-21-22
ALL ú ú 02 Page 504 ú Jul 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
RECIRCULATION FAN FILTER - REMOVAL/INSTALLATION
_______________________________________________
1. General_______
A. This procedure contains the tasks that follow:
(1)
AIRPLANES WITH A SINGLE FILTER INSTALLATION;
(a)
Recirculation Fan Filter Removal
(b)
Recirculation Fan Filter Installation
(2)
AIRPLANES WITH A TWO PIECE FILTER INSTALLATION;
(a)
Recirculation Fan Prefilter Removal
(b)
Recirculation Fan Prefilter Installation
(c)
Recirculation Fan HEPA Filter Removal
(d)
Recirculation Fan HEPA Filter Installation
B. One recirculation fan filter installation is installed in the
air-conditioning distribution bay.
TASK 21-21-23-004-082
2. AIRPLANES WITH A SINGLE FILTER INSTALLATION; Recirculation Fan Filter Removal (Fig. 401)________________________________
A. General
(1) One recirculation fan filter installation is installed in the air-conditioning distribution bay.
B. References
(1) AMM 12-31-01/201, Zone Diagrams
C. Access
(1) Location Zone (AMM 12-31-01/201)
210, Air-Conditioning Distribution Bay
D. Procedure
S 864-064
(1) Set these switches to the OFF position and attach DO-NOT-OPERATE identifiers:
(a) P5-10 Air-Conditioning Module
1) R PACK
2) L PACK
3) RECIRC FAN
S 014-068
(2) Remove this access panel:
(a) Access Panel, Right - Forward Cargo Compartment Aft Bulkhead
S 024-072
(3) Remove the recirculation fan filter:
(a)
Release the fasteners which hold the access door to the filter support (14 Locations).
(b)
Remove the access door.
(c)
Remove the filter.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-21-23
ALL ú ú 02 Page 401 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 空調 AIR CONDITIONING 1(34)
